Daily Papers

Normalization layers are a staple in state-of-the-art deep neural network architectures. They are widely believed to stabilize training, enable higher learning rate, accelerate convergence and improve generalization, though the reason for their effectiveness is still an active research topic. In this work, we challenge the commonly-held beliefs by showing that none of the perceived benefits is unique to normalization. Specifically, we propose fixed-update initialization (Fixup), an initialization motivated by solving the exploding and vanishing gradient problem at the beginning of training via properly rescaling a standard initialization. We find training residual networks with Fixup to be as stable as training with normalization -- even for networks with 10,000 layers. Furthermore, with proper regularization, Fixup enables residual networks without normalization to achieve state-of-the-art performance in image classification and machine translation.

In this work, we study the evolution of the loss Hessian across many classification tasks in order to understand the effect the curvature of the loss has on the training dynamics. Whereas prior work has focused on how different learning rates affect the loss Hessian observed during training, we also analyze the effects of model initialization, architectural choices, and common training heuristics such as gradient clipping and learning rate warmup. Our results demonstrate that successful model and hyperparameter choices allow the early optimization trajectory to either avoid -- or navigate out of -- regions of high curvature and into flatter regions that tolerate a higher learning rate. Our results suggest a unifying perspective on how disparate mitigation strategies for training instability ultimately address the same underlying failure mode of neural network optimization, namely poor conditioning. Inspired by the conditioning perspective, we show that learning rate warmup can improve training stability just as much as batch normalization, layer normalization, MetaInit, GradInit, and Fixup initialization.

Deep neural networks have achieved remarkable accomplishments in practice. The success of these networks hinges on effective initialization methods, which are vital for ensuring stable and rapid convergence during training. Recently, initialization methods that maintain identity transition within layers have shown good efficiency in network training. These techniques (e.g., Fixup) set specific weights to zero to achieve identity control. However, settings of remaining weight (e.g., Fixup uses random values to initialize non-zero weights) will affect the inductive bias that is achieved only by a zero weight, which may be harmful to training. Addressing this concern, we introduce fully identical initialization (IDInit), a novel method that preserves identity in both the main and sub-stem layers of residual networks. IDInit employs a padded identity-like matrix to overcome rank constraints in non-square weight matrices. Furthermore, we show the convergence problem of an identity matrix can be solved by stochastic gradient descent. Additionally, we enhance the universality of IDInit by processing higher-order weights and addressing dead neuron problems. IDInit is a straightforward yet effective initialization method, with improved convergence, stability, and performance across various settings, including large-scale datasets and deep models.

Initialization-free bundle adjustment (InitFree BA) aims to recover camera poses and scene structure directly from image observations, avoiding the geometric initialization stages of conventional structure-from-motion pipelines. Recent methods based on Object-Space Error (OSE) formulations and Variable Projection (VarPro) show encouraging optimization behavior from random camera configurations. However, existing evaluations primarily measure optimization success, leaving unclear whether a low OSE objective yields a valid metric 3D reconstruction. We revisit InitFree BA experimentally through a unified evaluation framework combining a C++ implementation of existing OSE formulations with a Blender-based dataset generator providing exact ground truth and controlled camera configurations and observation densities. Our experiments reveal a previously overlooked optimization--reconstruction gap: projective solutions with similarly low OSE values can lead to substantially different Euclidean reconstructions after metric upgrade. We identify initialization priors, landmark observation density, and metric-upgrade stability as key factors governing reconstruction success. Overall, our results suggest that the main challenge of InitFree BA is not merely minimizing OSE objectives, but obtaining projective reconstructions that admit reliable metric upgrade. We believe that the proposed benchmark, implementation, and analysis establish stronger experimental foundations for future research on initialization-free bundle adjustment, a problem largely unexplored within the computer vision community. Project page is available at https://github.com/simonwebertum/InitFreeBA.git.

Large language models (LLMs) have shown impressive effectiveness in various software engineering tasks, including automated program repair (APR). In this study, we take a deep dive into automated bug fixing utilizing LLMs. In contrast to many deep learning-based APR methods that assume known bug locations, rely on line-level localization tools, or address bug prediction and fixing in one step, our approach uniquely employs LLMs to predict bug location at the token level and subsequently utilizes them for bug fixing. This methodological separation of bug localization and fixing using different LLMs enables effective integration of diverse contextual information and improved incorporation of inductive biases. We introduce Toggle: Token-Granulated Bug Localization and Repair, a comprehensive program repair framework that integrates a bug localization model, an adjustment unit, and a bug-fixing model. Toggle takes a buggy function as input and generates a complete corrected function. We investigate various styles of prompting to the bug fixing model to identify the most effective prompts that better utilize the inductive bias and significantly outperform others. Toggle achieves the new state-of-the-art (SOTA) performance on the CodeXGLUE code refinement benchmark, and exhibits better and comparable performance on several other widely-used APR datasets, including Defects4J.

Tremendous efforts have been devoted to automating software debugging, a time-consuming process involving fault localization and repair generation. Recently, Large Language Models (LLMs) have shown great potential in automated debugging. However, we identified three challenges posed to traditional and LLM-based debugging tools: 1) the upstream imperfection of fault localization affects the downstream repair, 2) the deficiency in handling complex logic errors, and 3) the ignorance of program contexts. In this context, we propose the first automated, unified debugging framework, FixAgent, via LLM agent synergy. FixAgent can perform end-to-end localization, repair, and analysis of bugs. Our insight is that LLMs can benefit from general software engineering principles recognized by human developers in debugging, such as rubber duck debugging, enabling a better understanding of program functionality and logic bugs. Hence, we create three designs inspired by rubber ducking to address these challenges. They are agent specialization and synergy, key variable tracking, and program context comprehension, which request LLMs to provide explicit explanations and force them to focus on crucial program logic information. Experiments on the widely used dataset QuixBugs show that FixAgent correctly fixes 79 out of 80 bugs, 9 of which have never been fixed. It also plausibly patches 1.9X more defects than the best-performing repair tool on CodeFlaws, even with no bug location information and fewer than 0.6% sampling times. On average, FixAgent increases about 20% plausible and correct fixes compared to its base model using different LLMs, showing the effectiveness of our designs. Moreover, the correctness rate of FixAgent reaches remarkably 97.26%, indicating that FixAgent can potentially overcome the overfitting issue of the existing approaches.

In this paper, we study the role of initialization in Low Rank Adaptation (LoRA) as originally introduced in Hu et al. (2021). Essentially, to start from the pretrained model as initialization for finetuning, one can either initialize B to zero and A to random (default initialization in PEFT package), or vice-versa. In both cases, the product BA is equal to zero at initialization, which makes finetuning starts from the pretrained model. These two initialization schemes are seemingly similar. They should in-principle yield the same performance and share the same optimal learning rate. We demonstrate that this is an incorrect intuition and that the first scheme (initializing B to zero and A to random) on average yields better performance compared to the other scheme. Our theoretical analysis shows that the reason behind this might be that the first initialization allows the use of larger learning rates (without causing output instability) compared to the second initialization, resulting in more efficient learning of the first scheme. We validate our results with extensive experiments on LLMs.

Automatic program repair (APR) is crucial to improve software reliability. Recently, neural machine translation (NMT) techniques have been used to fix software bugs automatically. While promising, these approaches have two major limitations. Their search space often does not contain the correct fix, and their search strategy ignores software knowledge such as strict code syntax. Due to these limitations, existing NMT-based techniques underperform the best template-based approaches. We propose CURE, a new NMT-based APR technique with three major novelties. First, CURE pre-trains a programming language (PL) model on a large software codebase to learn developer-like source code before the APR task. Second, CURE designs a new code-aware search strategy that finds more correct fixes by focusing on compilable patches and patches that are close in length to the buggy code. Finally, CURE uses a subword tokenization technique to generate a smaller search space that contains more correct fixes. Our evaluation on two widely-used benchmarks shows that CURE correctly fixes 57 Defects4J bugs and 26 QuixBugs bugs, outperforming all existing APR techniques on both benchmarks.

Correcting bugs using modern Automated Program Repair (APR) can be both time-consuming and resource-expensive. We describe a program repair approach that aims to improve the scalability of modern APR tools. The approach leverages program reduction in the form of program slicing to eliminate code irrelevant to fixing the bug, which improves the APR tool's overall performance. We investigate slicing's impact on all three phases of the repair process: fault localization, patch generation, and patch validation. Our empirical exploration finds that the proposed approach, on average, enhances the repair ability of the TBar APR tool, but we also discovered a few cases where it was less successful. Specifically, on examples from the widely used Defects4J dataset, we obtain a substantial reduction in median repair time, which falls from 80 minutes to just under 18 minutes. We conclude that program reduction can improve the performance of APR without degrading repair quality, but this improvement is not universal. A replication package is available via Zenodo at https://doi.org/10.5281/zenodo.13074333. Keywords: automated program repair, dynamic program slicing, fault localization, test-suite reduction, hybrid techniques.

Large Language Models (LLMs) have shown impressive capabilities in downstream software engineering tasks such as Automated Program Repair (APR). In particular, there has been a lot of research on repository-level issue-resolution benchmarks such as SWE-Bench. Although there has been significant progress on this topic, we notice that in the process of solving such issues, existing agentic systems tend to hyper-localize on immediately suspicious lines of code and fix them in isolation, without a deeper understanding of the issue semantics, code semantics, or execution semantics. Consequently, many existing systems generate patches that overfit to the user issue, even when a more general fix is preferable. To address this limitation, we introduce SemAgent, a novel workflow-based procedure that leverages issue, code, and execution semantics to generate patches that are complete - identifying and fixing all lines relevant to the issue. We achieve this through a novel pipeline that (a) leverages execution semantics to retrieve relevant context, (b) comprehends issue-semantics via generalized abstraction, (c) isolates code-semantics within the context of this abstraction, and (d) leverages this understanding in a two-stage architecture: a repair stage that proposes fine-grained fixes, followed by a reviewer stage that filters relevant fixes based on the inferred issue-semantics. Our evaluations show that our methodology achieves a solve rate of 44.66% on the SWEBench-Lite benchmark beating all other workflow-based approaches, and an absolute improvement of 7.66% compared to our baseline, which lacks such deep semantic understanding. We note that our approach performs particularly well on issues requiring multi-line reasoning (and editing) and edge-case handling, suggesting that incorporating issue and code semantics into APR pipelines can lead to robust and semantically consistent repairs.

While prompt tuning approaches have achieved competitive performance with high efficiency, we observe that they invariably employ the same initialization process, wherein the soft prompt is either randomly initialized or derived from an existing embedding vocabulary. In contrast to these conventional methods, this study aims to investigate an alternative way to derive soft prompt. Our empirical studies show that the soft prompt typically exhibits a low intrinsic rank characteristic. With such observations, we propose decomposed prompt tuning, a novel approach that utilizes low-rank matrices to initialize the soft prompt. Through the low-rank reparameterization, our method significantly reduces the number of trainable parameters while maintaining effectiveness. Experimental results on the SuperGLUE benchmark in both high-resource and low-resource scenarios demonstrate the effectiveness of the proposed method.

Large Language Models (LLMs) achieve strong program repair performance but often suffer from over-editing, where excessive modifications overwrite correct code and hinder bug localization. We systematically quantify its impact and introduce precise repair task, which maximizes reuse of correct code while fixing only buggy parts. Building on this insight, we propose PRepair, a framework that mitigates over-editing and improves repair accuracy. PRepair has two components: Self-Breaking, which generates diverse buggy programs via controlled bug injection and min-max sampling, and Self-Repairing, which trains models with Edit-Aware Group Relative Policy Optimization (EA-GRPO) using an edit-aware reward to encourage minimal yet correct edits. Experiments show that PRepair improves repair precision by up to 31.4% under fix_1@1, a metric that jointly considers repair correctness and extent, and significantly increases decoding throughput when combined with speculative editing, demonstrating its potential for precise and practical code repair.

Current approaches to program synthesis with Large Language Models (LLMs) exhibit a "near miss syndrome": they tend to generate programs that semantically resemble the correct answer (as measured by text similarity metrics or human evaluation), but achieve a low or even zero accuracy as measured by unit tests due to small imperfections, such as the wrong input or output format. This calls for an approach known as Synthesize, Execute, Debug (SED), whereby a draft of the solution is generated first, followed by a program repair phase addressing the failed tests. To effectively apply this approach to instruction-driven LLMs, one needs to determine which prompts perform best as instructions for LLMs, as well as strike a balance between repairing unsuccessful programs and replacing them with newly generated ones. We explore these trade-offs empirically, comparing replace-focused, repair-focused, and hybrid debug strategies, as well as different template-based and model-based prompt-generation techniques. We use OpenAI Codex as the LLM and Program Synthesis Benchmark 2 as a database of problem descriptions and tests for evaluation. The resulting framework outperforms both conventional usage of Codex without the repair phase and traditional genetic programming approaches.

Modern software projects depend on third-party libraries that evolve continuously, introducing breaking API changes that prevent client code from compiling after a dependency update. When the same library update breaks multiple projects, existing repair approaches generate project-specific patches that cannot be reused, requiring each affected project to be repaired independently. We present BigBag, an agentic framework that generates fixing transformations: structured, executable programs that encode the repair logic at the API level and transfer to any client broken by the same update. We evaluate BigBag on 157 compilation failure breaking dependency updates from the BUMP benchmark, across eight configurations combining four large language models and two AST transformation engines (Spoon and JavaParser). The best configuration achieves a compilable transformation rate of 94.3% and a fix rate of 78.6%. Generated transformations transfer across projects, achieving a cross-project fix rate of 33.3% overall and 80% or above for breaking updates where all clients invoke the affected API element uniformly. These results show that agentic generation of reusable fixing transformations is a viable approach to scalable repair of breaking updates.

Automated Program Repair (APR) is a task to automatically generate patches for the buggy code. However, most research focuses on generating correct patches while ignoring the consistency between the fixed code and the original buggy code. How to conduct adaptive bug fixing and generate patches with minimal modifications have seldom been investigated. To bridge this gap, we first introduce a novel task, namely AdaPR (Adaptive Program Repair). We then propose a two-stage approach AdaPatcher (Adaptive Patch Generator) to enhance program repair while maintaining the consistency. In the first stage, we utilize a Bug Locator with self-debug learning to accurately pinpoint bug locations. In the second stage, we train a Program Modifier to ensure consistency between the post-modified fixed code and the pre-modified buggy code. The Program Modifier is enhanced with a location-aware repair learning strategy to generate patches based on identified buggy lines, a hybrid training strategy for selective reference and an adaptive preference learning to prioritize fewer changes. The experimental results show that our approach outperforms a set of baselines by a large margin, validating the effectiveness of our two-stage framework for the newly proposed AdaPR task.

Deep learning and language models are increasingly dominating automated program repair research. While previous generate-and-validate approaches were able to find and use fix ingredients on a file or even project level, neural language models are limited to the code that fits their input window. In this work we investigate how important identifier ingredients are in neural program repair and present ScanFix, an approach that leverages an additional scanner model to extract identifiers from a bug's file and potentially project-level context. We find that lack of knowledge of far-away identifiers is an important cause of failed repairs. Augmenting repair model input with scanner-extracted identifiers yields relative improvements of up to 31%. However, ScanFix is outperformed by a model with a large input window (> 5k tokens). When passing ingredients from the ground-truth fix, improvements are even higher. This shows that, with refined extraction techniques, ingredient scanning, similar to fix candidate ranking, could have the potential to become an important subtask of future automated repair systems. At the same time, it also demonstrates that this idea is subject to Sutton's bitter lesson and may be rendered unnecessary by new code models with ever-increasing context windows.

Large language models (LLMs) have made remarkable progress in code generation, but competitive programming remains a challenge. Recent training-based methods have improved code generation by using reinforcement learning (RL) with execution feedback. The more recent framework CURE further incorporates test generation into the training process, jointly training a Coder and a Tester within a single model. At inference time, the Coder generates many candidate programs, and the Tester generates tests from the problem description. The candidate who passes the most of the generated tests is selected as the final answer. However, CURE has two critical limitations. First, the Tester never reads any candidate code, so its tests often fail to expose implementation-specific bugs. Second, the Coder generates every candidate from scratch and never learns to fix a buggy program based on a failed test. To address these limitations, we propose FixAudit, which approaches competitive code generation from a new perspective: starting from a single initial candidate, it iteratively improves the candidate through a targeted test-and-repair debugging cycle. The framework trains one shared model with two specialized roles through four stages: the Fixer, which repairs the current candidate based on a failing test, and the Auditor, which reads the candidate code to generate new tests that expose its remaining bugs. We evaluate FixAudit on three benchmarks: APPS, CodeContests, and xCodeEval. Applied to a 7B model, the framework surpasses the average performance of the larger 32B baseline within the same model family under the zero-shot setting. Compared to strong baselines built on the same 7B base model, FixAudit improves average Pass@1 by 35.1% to 36.8% and average AvgPassRatio by 7.1% to 24.5%.

Millions of open-source projects with numerous bug fixes are available in code repositories. This proliferation of software development histories can be leveraged to learn how to fix common programming bugs. To explore such a potential, we perform an empirical study to assess the feasibility of using Neural Machine Translation techniques for learning bug-fixing patches for real defects. First, we mine millions of bug-fixes from the change histories of projects hosted on GitHub, in order to extract meaningful examples of such bug-fixes. Next, we abstract the buggy and corresponding fixed code, and use them to train an Encoder-Decoder model able to translate buggy code into its fixed version. In our empirical investigation we found that such a model is able to fix thousands of unique buggy methods in the wild. Overall, this model is capable of predicting fixed patches generated by developers in 9-50% of the cases, depending on the number of candidate patches we allow it to generate. Also, the model is able to emulate a variety of different Abstract Syntax Tree operations and generate candidate patches in a split second.

Most programmers make mistakes when writing code. Some of these mistakes are small and require few edits to the original program -- a class of errors recently termed last mile mistakes. These errors break the flow for experienced developers and can stump novice programmers. Existing automated repair techniques targeting this class of errors are language-specific and do not easily carry over to new languages. Transferring symbolic approaches requires substantial engineering and neural approaches require data and retraining. We introduce RING, a multilingual repair engine powered by a large language model trained on code (LLMC) such as Codex. Such a multilingual engine enables a flipped model for programming assistance, one where the programmer writes code and the AI assistance suggests fixes, compared to traditional code suggestion technology. Taking inspiration from the way programmers manually fix bugs, we show that a prompt-based strategy that conceptualizes repair as localization, transformation, and candidate ranking, can successfully repair programs in multiple languages with minimal effort. We present the first results for such a multilingual repair engine by evaluating on 6 different languages and comparing performance to language-specific repair engines. We show that RING can outperform language-specific repair engines for three of these languages.

Automated program repair (APR) aims to fix software bugs without human intervention and template-based APR has been widely investigated with promising results. However, it is challenging for template-based APR to select the appropriate donor code, which is an important repair ingredient for generating candidate patches. Inappropriate donor code may cause plausible but incorrect patch generation even with correct fix patterns, limiting the repair performance. In this paper, we aim to revisit template-based APR, and propose GAMMA, to directly leverage large pre-trained language models for donor code generation. Our main insight is that instead of retrieving donor code in the local buggy file, we can directly predict the correct code tokens based on the context code snippets and repair patterns by a cloze task. Specifically, (1) GAMMA revises a variety of fix templates from state-of-the-art template-based APR techniques (i.e., TBar) and transforms them into mask patterns. (2) GAMMA adopts a pre-trained language model to predict the correct code for masked code as a fill-in-the-blank task. The experimental results demonstrate that GAMMA correctly repairs 82 bugs on Defects4J-v1.2, which achieves 20.59\% (14 bugs) and 26.15\% (17 bugs) improvement over the previous state-of-the-art template-based approach TBar and learning-based one Recoder. Furthermore, GAMMA repairs 45 bugs and 22 bugs from the additional Defects4J-v2.0 and QuixBugs, indicating the generalizability of GAMMA in addressing the dataset overfitting issue. We also prove that adopting other pre-trained language models can provide substantial advancement, e.g., CodeBERT-based and ChatGPT-based GAMMA is able to fix 80 and 67 bugs on Defects4J-v1.2, indicating the scalability of GAMMA. Overall, our study highlights the promising future of adopting pre-trained models to generate correct patches on top of fix patterns.

Most Bundle Adjustment (BA) solvers like the Levenberg-Marquardt algorithm require a good initialization. Instead, initialization-free BA remains a largely uncharted territory. The under-explored Variable Projection algorithm (VarPro) exhibits a wide convergence basin even without initialization. Coupled with object space error formulation, recent works have shown its ability to solve small-scale initialization-free bundle adjustment problem. To make such initialization-free BA approaches scalable, we introduce Power Variable Projection (PoVar), extending a recent inverse expansion method based on power series. Importantly, we link the power series expansion to Riemannian manifold optimization. This projective framework is crucial to solve large-scale bundle adjustment problems without initialization. Using the real-world BAL dataset, we experimentally demonstrate that our solver achieves state-of-the-art results in terms of speed and accuracy. To our knowledge, this work is the first to address the scalability of BA without initialization opening new venues for initialization-free structure-from-motion.

Large language models (LLMs) have advanced automatic program repair (APR) to the point where agentic systems routinely resolve real-world, repository-level issues. Yet the generated patch has received little scrutiny beyond whether it passes tests. In this paper, we identify patch verbosity as a major yet overlooked concern in LLM-based APR. Characterizing 28 state-of-the-art approaches on SWE-bench Verified, we find that even successful patches are consistently larger and more complex than developer patches, with the median approach producing 121.78% more total changes, 80.91% more net changes, and 43.99% higher cyclomatic complexity. We further show that this verbosity is rooted in capability-oriented design choices such as iterative refinement and broad context, and can hardly be reduced by surface-level controls such as output format or minimality prompts. Motivated by these findings, we formulate post-generation patch refinement and propose RECAP, a lightweight, plug-and-play adapter that attaches to existing repair frameworks after generation. RECAP's refiner is trained via supervised fine-tuning and direct preference optimization with distilled reasoning traces, on a dataset of patch pairs we construct from multiple sources. Across four host systems, prompting, commit-untangling, and minimality-aware baselines reduce patch size only by sacrificing 49 to 217 resolved instances. In contrast, RECAP achieves a substantially better size-correctness tradeoff, cutting average total changes from +242.14% to +4.24% and net changes from +348.24% to -39.75% relative to developer patches while preserving or improving resolution by up to 42 instances. Our results indicate that minimality cannot be simply reduced to syntactic compression, and that decoupling minimization from generation offers a practical path to more reviewable repairs.

LLM-based coding agents have significantly advanced automated software issue resolution, yet they remain highly prone to factual errors caused by insufficient repository understanding. Recent methods attempt to mitigate this limitation through pre-repair repository exploration; however, their fix-driven strategies explore repositories without identifying the agent's knowledge gaps, often yielding imprecise context that fails to bridge the underlying understanding deficit. In this paper, we propose ACQUIRE, a QA-driven framework for software issue resolution. Mirroring how experienced developers first comprehend unfamiliar code before attempting a fix, ACQUIRE explicitly acquires repository knowledge prior to repair. The framework decouples knowledge acquisition from patch generation through two stages: in the first stage, a Questioner and an Answerer collaborate to acquire structured repository knowledge, where the Questioner poses targeted questions and the Answerer produces evidence-grounded answers through autonomous exploration; in the second stage, the Resolver leverages the resulting QA knowledge to generate informed patches. By transforming implicit knowledge gaps into explicit, factually reliable understanding, ACQUIRE accelerates knowledge-intensive repair stages and enables more accurate resolution. Experiments on SWE-bench Verified demonstrate that ACQUIRE consistently outperforms representative pre-repair methods, raising Pass@1 by up to 4.4 percentage points with modest additional cost and time.

AI-driven program repair uses AI models to repair buggy software by producing patches. Rapid advancements in AI surely impact state-of-the-art performance of program repair. Yet, grasping this progress requires frequent and standardized evaluations. We propose RepairBench, a novel leaderboard for AI-driven program repair. The key characteristics of RepairBench are: 1) it is execution-based: all patches are compiled and executed against a test suite, 2) it assesses frontier models in a frequent and standardized way. RepairBench leverages two high-quality benchmarks, Defects4J and GitBug-Java, to evaluate frontier models against real-world program repair tasks. We publicly release the evaluation framework of RepairBench. We will update the leaderboard as new frontier models are released.

Static analysis tools are widely used for vulnerability detection as they understand programs with complex behavior and millions of lines of code. Despite their popularity, static analysis tools are known to generate an excess of false positives. The recent ability of Machine Learning models to understand programming languages opens new possibilities when applied to static analysis. However, existing datasets to train models for vulnerability identification suffer from multiple limitations such as limited bug context, limited size, and synthetic and unrealistic source code. We propose D2A, a differential analysis based approach to label issues reported by static analysis tools. The D2A dataset is built by analyzing version pairs from multiple open source projects. From each project, we select bug fixing commits and we run static analysis on the versions before and after such commits. If some issues detected in a before-commit version disappear in the corresponding after-commit version, they are very likely to be real bugs that got fixed by the commit. We use D2A to generate a large labeled dataset to train models for vulnerability identification. We show that the dataset can be used to build a classifier to identify possible false alarms among the issues reported by static analysis, hence helping developers prioritize and investigate potential true positives first.

Security patches for open-source software constitute a foundational resource for vulnerability remediation research and practice. However, analyzing and applying multiple patches remains challenging, especially when trying to determine at what point in a patch sequence a vulnerability is fully remediated. This paper presents a systematic analysis of multi-patch vulnerability fixes, focusing on their root causes, characteristics, and methods for verifying remediation status throughout the fixing process. Through a manual examination of 1,646 multi-patch fix records, we develop a taxonomy with three primary categories and six subcategories based on their causes. We then compare the distinctive characteristics of multi-patch fixes with those of single-patch fixes and analyze feature variations across categories. In addition, we assess representative vulnerability detection methods for validating complete remediation during multi-patch fixing. Our findings provide new insights into multi-patch fixes and lay a foundation for future research in this field.

Frontier language models can resolve repository-level software issues, but each attempt is expensive, and existing routers select a model from the issue text alone. We present SuperScout, which routes after scouting the repository: a 7B searcher, SuperScout-7B, first explores the repository and produces a structured handoff whose reproduction claims are sandbox-verified, with false claims stripped before delivery. The searcher's hidden states, together with the task text, then feed a resume-based router that dispatches the task to one of four frontier fixers. Adding a new fixer requires no retraining. On the full Python slice of SWE-bench Pro (266 tasks) under the benchmark's official capped budget tier, SuperScout matches the best single model's solve rate (159 of 266 for SuperScout, 158 for the best model) at about a fifth of the total cost per solve, and the reported configuration sits above the random traffic-splitting baseline. A no-router ablation, always the cheapest fixer with the handoff, ties the routed system on this benchmark, so the handoff rather than the routing decision carries the result. A paired calibration study points to the mechanism: the handoff appears to redistribute rather than add solving ability, lifting the three cheaper fixers while slightly hurting the strongest, though at N=99 the per-fixer effects are directional only; the searcher's hidden states improve cost routing on the calibration labels while the handoff's own text does not. The searcher's compute adds less than half a cent of GPU time per task.

A research idea may be novel, coherent, and scientifically plausible, yet its proposed method may remain insufficiently specified for faithful implementation. We study the codification readiness of implementation-facing research-method specifications, defined by whether they provide sufficient methodological information for a competent implementer or coding agent to construct the intended method without unsupported assumptions. We construct evidence-grounded specifications and their supported resolutions from papers, codebases, issue threads, and reproduction artifacts. We introduce IdeaAMBIG, a benchmark of 660 evidence-grounded instances: 163 real-world gaps from reproducibility reports and GitHub issues, and 497 controlled synthetic gaps injected into codification-ready references. IdeaAMBIG evaluates three capabilities: codification-readiness assessment, defect localization, and clarification action generation. Defect localization receives only the specification, whereas clarification additionally receives the annotated defect. Across 13 LLMs, the best model achieves 9.6% Macro Defect Recovery Rate on real-world instances but 80.6% Macro Clarification Action Success Rate when given the defect. In an oracle study, supplying the gold resolution raises the downstream codification-ready rate from 14% to 98%. Across all evaluated models, defect localization is the main bottleneck, with stronger clarification given the defect.

Context: Bugs in code are inevitable and can lead to severe consequences, ranging from security vulnerabilities to operational failures. Debugging software remains challenging despite advances in testing and verification, often requiring extensive manual effort. Learning-based automated program repair (APR) has shown promise in reducing the time, effort, and cost of manually fixing bugs. However, existing techniques face several challenges, including language-dependent strategies, limited bug context utilization, and difficulties in handling bugs that span multiple locations in the code. Objective: This paper introduces MultiMend, a learning-based APR approach designed to improve repair performance on multiple programming languages with language-independent context augmentation and multi-hunk patch generation. Method: MultiMend fine-tunes a pre-trained encoder-decoder transformer model (CodeT5) to generate bug-fixing patches. It embeds source code lines and applies retrieval-augmented generation to augment the buggy context with relevant lines during patch generation. The approach systematically constructs patches for multi-hunk bugs to reduce the needed patch validations. We evaluate MultiMend on four benchmarks with four programming languages and compare it with state-of-the-art methods. Results: Experimental results show that MultiMend achieves competitive effectiveness and efficiency against compared tools. Across all benchmarks, MultiMend fixes 2,077 bugs, of which 1,455 are identical to the developer's patch, and 106 are for multi-hunk bugs. Both context augmentation and multi-hunk patch generation positively contribute to the results. Conclusion: MultiMend shows promising performance across benchmarks. The findings highlight its applicability to real-world software maintenance and its potential to reduce manual debugging efforts.

Current learning-based Automated Vulnerability Repair (AVR) approaches, while promising, often fail to generalize effectively in real-world scenarios. Our diagnostic analysis reveals three fundamental weaknesses in state-of-the-art AVR approaches: (1) limited cross-repository generalization, with performance drops on unseen codebases; (2) inability to capture long-range dependencies, causing a performance degradation on complex, multi-hunk repairs; and (3) over-reliance on superficial lexical patterns, leading to significant performance drops on vulnerabilities with minor syntactic variations like variable renaming. To address these limitations, we propose SeCuRepair, a semantics-aligned, curriculum-driven, and reasoning-enhanced framework for vulnerability repair. At its core, SeCuRepair adopts a reason-then-edit paradigm, requiring the model to articulate why and how a vulnerability should be fixed before generating the patch. This explicit reasoning enforces a genuine understanding of repair logic rather than superficial memorization of lexical patterns. SeCuRepair also moves beyond traditional supervised fine-tuning and employs semantics-aware reinforcement learning, rewarding patches for their syntactic and semantic alignment with the oracle patch rather than mere token overlap. Complementing this, a difficulty-aware curriculum progressively trains the model, starting with simple fixes and advancing to complex, multi-hunk coordinated edits. We evaluate SeCuRepair on strict, repository-level splits of BigVul and newly crafted PrimeVul_AVR datasets. SeCuRepair significantly outperforms all baselines, surpassing the best-performing baselines by 34.52% on BigVul and 31.52% on PrimeVulAVR in terms of CodeBLEU, respectively. Comprehensive ablation studies further confirm that each component of our framework contributes to its final performance.

LLM-based Lean proving systems increasingly organize a proof as a blueprint: a dependency graph of formal statements. We introduce BlueprintRepair, a repair interface that lets a model change this graph through ten schema-checked local operations. An operation names the node it edits, so the target theorem cannot be changed. Lean checks every applied change, and an accepted repair must declare every blueprint lemma its proof uses. We also construct BlueprintTrace, a benchmark of 142 controlled failures with complete accepted and rejected repair trajectories. We compare typed edits, exact source patches, and complete module rewrites under matched source, feedback, model, and budget, one episode per state and interface. With DeepSeek-V4-Flash, the three interfaces solve almost the same number of the benchmark's localized failures. Typed repair is the cheapest per solved state (patching is 1.30x as expensive, rewriting 2.06x), and within 10,000 completion tokens per task it reaches almost all of its final coverage, while both free-form interfaces are well behind. A second model, Qwen3.6-Flash, solves fewer states but keeps typed repair cheapest, puts it ahead on the proof-authoring states, and repeats the localized pattern.

In the multi-commit development model, programmers complete tasks (e.g., implementing a feature) by organizing their work in several commits and packaging them into a commit-set. Analyzing data from developers using this model can be useful to tackle challenging developers' needs, such as knowing which features introduce a bug as well as assessing the risk of integrating certain features in a release. However, to do so one first needs to identify fix-inducing commit-sets. For such an identification, the SZZ algorithm is the most natural candidate, but its performance has not been evaluated in the multi-commit context yet. In this study, we conduct an in-depth investigation on the reliability and performance of SZZ in the multi-commit model. To obtain a reliable ground truth, we consider an already existing SZZ dataset and adapt it to the multi-commit context. Moreover, we devise a second dataset that is more extensive and directly created by developers as well as Quality Assurance (QA) engineers of Mozilla. Based on these datasets, we (1) test the performance of B-SZZ and its non-language-specific SZZ variations in the context of the multi-commit model, (2) investigate the reasons behind their specific behavior, and (3) analyze the impact of non-relevant commits in a commit-set and automatically detect them before using SZZ.

Developers increasingly delegate real maintenance work to product-grade coding agents, and many state tasks in their native language, in the style of a customer request rather than a curated English issue. We introduce RuBench 1.0, a benchmark of 25 tasks mined from recent fix commits in five live open-source repositories (aiohttp, aiogram, Laravel, NestJS, Fastify), each specified natively in Russian -- written from scratch, not translated -- and judged by the upstream maintainer's regression tests, which we withhold from release. All fix commits postdate the training-data cutoffs of every evaluated model. Round 1 evaluates Claude Code with Opus 4.8, Sonnet 5, and Haiku 4.5, and Codex CLI with GPT-5.5 (3 independent runs each; pass@1 with task-level uncertainty); the best configuration resolves 78.7% of tasks. Auditing full trajectories of an hors-concours configuration (Claude Code + Fable 5), we caught the product silently substituting the model on 20% of tasks via an official safeguard fallback -- evidence that the deployed product, not the model, is the unit actually measured. Version 2 adds Round 2: seven further configurations on the same frozen set under a per-configuration freshness gate -- the Russian-market agents SourceCraft CLI (ds, legacy) and Koda CLI (koda-pro), Antigravity with Gemini 3.1 Pro and 3.5 Flash, and Codex CLI with GPT-5.6 Sol and Luna. SourceCraft's flagship resolves 68.1% (N=23), above GPT-5.5 and both Gemini rows. A tool-call contamination re-audit of all 437 Round-2 trajectories finds the Russian and Gemini columns clean (0/293 cells) while flagging systematic oracle-hunting in the GPT-5.6 family (8/69 and 13/75 cells), including one case of mining a prior round's artifacts from the run machine's disk; honest scores are published alongside raw ones. We release statements, metadata, trajectories, and diffs; oracles are withheld with a SHA-256 manifest.

During Automated Program Repair (APR), it can be challenging to synthesize correct patches for real-world systems in general-purpose programming languages. Recent Large Language Models (LLMs) have been shown to be helpful "copilots" in assisting developers with various coding tasks, and have also been directly applied for patch synthesis. However, most LLMs treat programs as sequences of tokens, meaning that they are ignorant of the underlying semantics constraints of the target programming language. This results in plenty of statically invalid generated patches, impeding the practicality of the technique. Therefore, we propose Repilot, a framework to further copilot the AI "copilots" (i.e., LLMs) by synthesizing more valid patches during the repair process. Our key insight is that many LLMs produce outputs autoregressively (i.e., token by token), resembling human writing programs, which can be significantly boosted and guided through a Completion Engine. Repilot synergistically synthesizes a candidate patch through the interaction between an LLM and a Completion Engine, which 1) prunes away infeasible tokens suggested by the LLM and 2) proactively completes the token based on the suggestions provided by the Completion Engine. Our evaluation on a subset of the widely-used Defects4j 1.2 and 2.0 datasets shows that Repilot fixes 66 and 50 bugs, respectively, surpassing the best-performing baseline by 14 and 16 bugs fixed. More importantly, Repilot is capable of producing more valid and correct patches than the base LLM when given the same generation budget.

Automated Program Repair (APR) has evolved significantly with the advent of Large Language Models (LLMs). Fine-tuning LLMs for program repair is a recent avenue of research, with many dimensions which have not been explored. Existing work mostly fine-tunes LLMs with naive code representations and is fundamentally limited in its ability to fine-tune larger LLMs. To address this problem, we propose RepairLLaMA, a novel program repair approach that combines 1) code representations for APR and 2) the state-of-the-art parameter-efficient LLM fine-tuning technique called LoRA. This results in RepairLLaMA producing a highly effective `program repair adapter' for fixing bugs with language models. Our experiments demonstrate the validity of both concepts. First, fine-tuning adapters with program repair specific code representations enables the model to use meaningful repair signals. Second, parameter-efficient fine-tuning helps fine-tuning to converge and contributes to the effectiveness of the repair adapter to fix data-points outside the fine-tuning data distribution. Overall, RepairLLaMA correctly fixes 125 Defects4J v2 and 82 HumanEval-Java bugs, outperforming all baselines.

While Large Language Models have greatly advanced automated issue resolution, existing agent-based methods exhibit a fundamental limitation in their insufficient exploration of repair strategies. This insufficiency manifests in two key aspects. First, the exploration of multiple potential edit locations is limited. Second, the exploration of repair attempts at each location is also insufficient. To address these challenges, we present PhoenixRepair, a multi-agent framework that systematically explores multiple candidate edit locations and performs iterative reflection and refinement on patch generation, thereby expanding the search space of repair strategies. Our framework begins with multi-location sampling, optionally augmented with graph-based localization information for difficult tasks, followed by iterative reflection and refinement to generate better patches, culminating in final-round generation guided by distilled insights from all historical attempts. Experiments on SWE-bench-Verified demonstrate that PhoenixRepair achieves the largest relative improvement of 7.8\% over SWE-agent under DeepSeek-V3.1, and attains the highest resolved rate of 76.0\% Pass@1 under MiniMax-M2.5. Meanwhile, it achieves higher fault localization accuracy than existing approaches. Our code is available at https://github.com/DeepSoftwareAnalytics/PhoenixRepair.

Application Programming Interfaces (APIs) facilitate the integration of third-party dependencies within the code of client applications. However, changes to an API, such as deprecation, modification of parameter names or types, or complete replacement with a new API, can break existing client code. These changes are called breaking dependency updates; It is often tedious for API users to identify the cause of these breaks and update their code accordingly. In this paper, we explore the use of Large Language Models (LLMs) to automate client code updates in response to breaking dependency updates. We evaluate our approach on the BUMP dataset, a benchmark for breaking dependency updates in Java projects. Our approach leverages LLMs with advanced prompts, including information from the build process and from the breaking dependency analysis. We assess effectiveness at three granularity levels: at the build level, the file level, and the individual compilation error level. We experiment with five LLMs: Google Gemini-2.0 Flash, OpenAI GPT4o-mini, OpenAI o3-mini, Alibaba Qwen2.5-32b-instruct, and DeepSeek V3. Our results show that LLMs can automatically repair breaking updates. Among the considered models, OpenAI's o3-mini is the best, able to completely fix 27% of the builds when using prompts that include contextual information such as the buggy line, API differences, error messages, and step-by-step reasoning instructions. Also, it fixes 78% of the individual compilation errors. Overall, our findings demonstrate the potential for LLMs to fix compilation errors due to breaking dependency updates, supporting developers in their efforts to stay up-to-date with changes in their dependencies.

Large language models (LLMs) have demonstrated remarkable capabilities on a broad spectrum of downstream tasks. Within the realm of software engineering, specialized tasks on code, such as program repair, present unique challenges, necessitating fine-tuning to unlock state-of-the-art performance. Fine-tuning approaches proposed in the literature for LLMs on program repair tasks are however generally overlooking the need to reason about the logic behind code changes, beyond syntactic patterns in the data. High-performing fine-tuning experiments also usually come at very high computational costs. With MORepair, we propose a novel perspective on the learning focus of LLM fine-tuning for program repair: we not only adapt the LLM parameters to the syntactic nuances of the task of code transformation (objective 1), but we also specifically fine-tune the LLM with respect to the logical reason behind the code change in the training data (objective 2). Such a multi-objective fine-tuning will instruct LLMs to generate high-quality patches. We apply MORepair to fine-tune four open-source LLMs with different sizes and architectures. Experimental results on C++ and Java repair benchmarks show that the implemented fine-tuning effectively boosts LLM repair performance by 7.6% to 10% in Top-10 repair suggestions. We further show that our fine-tuning strategy yields superior performance compared to the incumbent state-of-the-art in fine-tuned models for program repair, Fine-tune-CoT and RepairLLaMA.

Code agents increasingly help developers work with unfamiliar repositories, but every such task depends on a costly prerequisite: bootstrapping the repository into a usable development state. This process requires substantial trial-and-error exploration, yet the resulting knowledge--resolved dependencies, repair strategies--stays trapped in a single conversation, unavailable to future agents. We therefore formulate repository bootstrapping as a reusable startup knowledge problem and introduce BootstrapAgent, a multi-agent framework that distills the heuristics discovered during bootstrap exploration into a persistent, verifiable, agent-consumable .bootstrap contract. Through evidence extraction, structured planning, deterministic Docker-based verification, and trace-driven repair, BootstrapAgent generates a contract covering environment setup, diagnostic checks, minimal verification, and accumulated repair knowledge. We further propose warm repair with clean replay to accelerate iterative debugging without sacrificing cold-start reproducibility, and a delta repair with sanity check to prevent reward hacking. Experiments on three benchmarks show that BootstrapAgent achieves a 92.9% success rate, outperforming the baseline by over 10% while reducing downstream agent token usage by 25.9% and build time by 22.3%. Our code is available at https://github.com/Vossera/BootstrapAgent.

Automated Program Repair (APR) improves software reliability by generating patches for a buggy program automatically. Recent APR techniques leverage deep learning (DL) to build models to learn to generate patches from existing patches and code corpora. While promising, DL-based APR techniques suffer from the abundant syntactically or semantically incorrect patches in the patch space. These patches often disobey the syntactic and semantic domain knowledge of source code and thus cannot be the correct patches to fix a bug. We propose a DL-based APR approach KNOD, which incorporates domain knowledge to guide patch generation in a direct and comprehensive way. KNOD has two major novelties, including (1) a novel three-stage tree decoder, which directly generates Abstract Syntax Trees of patched code according to the inherent tree structure, and (2) a novel domain-rule distillation, which leverages syntactic and semantic rules and teacher-student distributions to explicitly inject the domain knowledge into the decoding procedure during both the training and inference phases. We evaluate KNOD on three widely-used benchmarks. KNOD fixes 72 bugs on the Defects4J v1.2, 25 bugs on the QuixBugs, and 50 bugs on the additional Defects4J v2.0 benchmarks, outperforming all existing APR tools.

Large Language Models (LLMs) have demonstrated remarkable proficiency across a variety of complex tasks. One significant application of LLMs is in tackling software engineering challenges, particularly in resolving real-world tasks on GitHub by fixing code based on the issues reported by the users. However, many current approaches rely on proprietary LLMs, which limits reproducibility, accessibility, and transparency. The critical components of LLMs for addressing software engineering issues and how their capabilities can be effectively enhanced remain unclear. To address these challenges, we introduce SWE-Fixer, a novel open-source LLM designed to effectively and efficiently resolve GitHub issues. SWE-Fixer comprises two essential modules: a code file retrieval module and a code editing module. The retrieval module employs BM25 along with a lightweight LLM model to achieve coarse-to-fine file retrieval. Subsequently, the code editing module utilizes the other LLM model to generate patches for the identified files. Then, to mitigate the lack of publicly available datasets, we compile an extensive dataset that includes 110K GitHub issues along with their corresponding patches, and train the two modules of SWE-Fixer separately. We assess our approach on the SWE-Bench Lite and Verified benchmarks, achieving state-of-the-art performance among open-source models with scores of 23.3% and 30.2%, respectively. These outcomes highlight the efficacy of our approach. We will make our model, dataset, and code publicly available at https://github.com/InternLM/SWE-Fixer.

Automatic program repair (APR) is crucial to reduce manual debugging efforts for developers and improve software reliability. While conventional search-based techniques typically rely on heuristic rules or a redundancy assumption to mine fix patterns, recent years have witnessed the surge of deep learning (DL) based approaches to automate the program repair process in a data-driven manner. However, their performance is often limited by a fixed set of parameters to model the highly complex search space of APR. To ease such burden on the parametric models, in this work, we propose a novel Retrieval-Augmented Patch Generation framework (RAP-Gen) by explicitly leveraging relevant fix patterns retrieved from a codebase of previous bug-fix pairs. Specifically, we build a hybrid patch retriever to account for both lexical and semantic matching based on the raw source code in a language-agnostic manner, which does not rely on any code-specific features. In addition, we adapt a code-aware language model CodeT5 as our foundation model to facilitate both patch retrieval and generation tasks in a unified manner. We adopt a stage-wise approach where the patch retriever first retrieves a relevant external bug-fix pair to augment the buggy input for the CodeT5 patch generator, which synthesizes a ranked list of repair patch candidates. Notably, RAP-Gen is a generic APR framework that can flexibly integrate different patch retrievers and generators to repair various types of bugs. We thoroughly evaluate RAP-Gen on three benchmarks in two programming languages, including the TFix benchmark in JavaScript, and Code Refinement and Defects4J benchmarks in Java, where the bug localization information may or may not be provided. Experimental results show that RAP-Gen significantly outperforms previous state-of-the-art approaches on all benchmarks, e.g., repairing 15 more bugs on 818 Defects4J bugs.

Research shows that grammatical mistakes in a sentence can be corrected by translating it to another language and back using neural machine translation with language models. We investigate whether this correction capability of Large Language Models (LLMs) extends to Automatic Program Repair (APR). Current generative models for APR are pre-trained on source code and fine-tuned for repair. This paper proposes bypassing the fine-tuning step and using Round-Trip Translation (RTT): translation of code from one programming language to another programming or natural language, and back. We hypothesize that RTT with LLMs restores the most commonly seen patterns in code during pre-training, i.e., performs a regression toward the mean, which removes bugs as they are a form of noise w.r.t. the more frequent, natural, bug-free code in the training data. To test this hypothesis, we employ eight recent LLMs pre-trained on code, including the latest GPT versions, and four common program repair benchmarks in Java. We find that RTT with English as an intermediate language repaired 101 of 164 bugs with GPT-4 on the HumanEval-Java dataset. Moreover, 46 of these are unique bugs that are not repaired by other LLMs fine-tuned for APR. Our findings highlight the viability of round-trip translation with LLMs as a technique for automated program repair and its potential for research in software engineering. Keywords: automated program repair, large language model, machine translation

Automatic program repair seeks to generate correct code from buggy programs, with most approaches searching the correct program in a discrete, symbolic space of source code tokens. This symbolic search is fundamentally limited by its inability to directly reason about program behavior. We introduce Gradient-Based Program Repair (GBPR), a new paradigm that reframes program repair as continuous optimization in a differentiable numerical program space. Our core insight is to compile symbolic programs into differentiable numerical representations, enabling search in the numerical program space directly guided by program behavior. To evaluate GBPR, we present RaspBugs, a new benchmark of 1,466 buggy symbolic RASP programs and their respective numerical representations. Our experiments demonstrate that GBPR can effectively repair buggy symbolic programs by gradient-based optimization in the numerical program space, with convincing repair trajectories. To our knowledge, we are the first to state program repair as continuous optimization in a numerical program space. Our work establishes a new direction for program repair research, bridging two rich worlds: continuous optimization and program behavior.

To support software developers in finding and fixing software bugs, several automated program repair techniques have been introduced. Given a test suite, standard methods usually either synthesize a repair, or navigate a search space of software edits to find test-suite passing variants. Recent program repair methods are based on deep learning approaches. One of these novel methods, which is not primarily intended for automated program repair, but is still suitable for it, is ChatGPT. The bug fixing performance of ChatGPT, however, is so far unclear. Therefore, in this paper we evaluate ChatGPT on the standard bug fixing benchmark set, QuixBugs, and compare the performance with the results of several other approaches reported in the literature. We find that ChatGPT's bug fixing performance is competitive to the common deep learning approaches CoCoNut and Codex and notably better than the results reported for the standard program repair approaches. In contrast to previous approaches, ChatGPT offers a dialogue system through which further information, e.g., the expected output for a certain input or an observed error message, can be entered. By providing such hints to ChatGPT, its success rate can be further increased, fixing 31 out of 40 bugs, outperforming state-of-the-art.

Language Models (LMs) have become widely used in software engineering, especially for tasks such as code generation, where they are referred to as code LMs. These models have proven effective in generating code, making it easier for developers to automate coding activities. However, research has highlighted a significant limitation: despite their effectiveness, LMs often produce code that is incorrect, buggy, or not fully functional. Updating these models with limited data can be prohibitively challenging, yet it is essential to maximize their utility. This may require hot-fix techniques (updating models with limited data) to resolve. In this paper, we propose Model Improvement via Neuron Targeting (MINT), a novel approach for repairing code LMs. MINT leverages the semantic property of language models to perform neuron-level repairs in a novel way. Further, by analyzing the relationships between the model's latent representations, the incorrect outputs, and the desired outputs, MINT determines which neurons are worth updating. This approach ensures that only the neurons crucial to the model's failure are targeted, avoiding unnecessary changes and allowing for a more efficient and precise repair process. MINT is effective, efficient, and reliable, capable of correcting a neural model by patching a minimum number of neurons (usually one or two neurons). Our approach is evaluated on three coding tasks: line-level code generation, shellcode generation, and intent-to-bash translation. The experimental results demonstrate that the proposed approach significantly outperforms the state-of-the-art in both effectiveness and efficiency measures. In addition, we analyze and discuss the side effects of model repair techniques, including the balance between generalization and specificity, and the performance after multiple repairs in succession.

Bug-fix benchmarks are essential for evaluating methodologies in automatic program repair (APR) and fault localization (FL). However, existing benchmarks, exemplified by Defects4J, need to evolve to incorporate recent bug-fixes aligned with contemporary development practices. Moreover, reproducibility, a key scientific principle, has been lacking in bug-fix benchmarks. To address these gaps, we present GitBug-Java, a reproducible benchmark of recent Java bugs. GitBug-Java features 199 bugs extracted from the 2023 commit history of 55 notable open-source repositories. The methodology for building GitBug-Java ensures the preservation of bug-fixes in fully-reproducible environments. We publish GitBug-Java at https://github.com/gitbugactions/gitbug-java.

Rendering views using 3D scene representations such as Gaussian Splatting (3DGS), Neural Radiance Fields (NeRF), meshes, or even point clouds produces artifacts when input views are sparse or target views lie far from the input. Recent work mitigates these artifacts using diffusion-based generative priors, but is specialized to individual representations and require custom architectures or extensive retraining. We present FixAnything, a single model for fixing a wide range of rendering artifacts. It does so by repurposing a pretrained video generative model, leveraging its implicit multi-view priors with only minimal modification and lightweight finetuning. Our key insight is that even noisily-rendered sequences preserve camera motion and coarse scene structure, allowing cleanup to be formulated as video-to-video translation. To control what scene structure should be preserved, we introduce a binary mask denoting the clean pixels, enabling the model to anchor its output to high-quality inputs (e.g. training views) while refining the rest. To encourage FixAnything to produce 3D-consistent renderings that support downstream reconstruction, we use camera pose accuracy (recovered via structure-from-motion) as a reward signal for direct preference optimization (DPO). Across four distinct 3D representations, FixAnything consistently improves rendering quality with lightweight finetuning, demonstrating that a single generalist video prior can replace multiple specialist refinement pipelines. The simplicity of the framework enables immediate adoption of stronger future video models without architectural redesign.

Automated program repair (APR) has recently shifted toward large language models and agent-based systems, yet most systems rely on local snapshot context, overlooking repository history. Prior work shows that repository history helps repair single-line bugs, since the last commit touching the buggy line is often the bug-introducing one. In this paper, we investigate whether repository history can also improve agentic APR systems at scale, especially for complex multi-hunk bugs. We present HAFixAgent, a History-Aware Bug-Fixing Agent that injects blame-derived repository heuristics into its repair loop. A preliminary study of all 854 real-world bugs from Defects4J motivates our design, showing that bug-relevant history is both widely available and highly concentrated. Empirical comparison of HAFixAgent with two state-of-the-art baselines shows: (1) Effectiveness: HAFixAgent significantly improves over the agent-based baseline (by 212.3%) and the multi-hunk baseline (by 29.9%). (2) Efficiency: history does not significantly increase agent steps and keeps token costs comparable, with notably lower median costs for complex multi-file-multi-hunk bugs. (3) Practicality: combining different historical heuristics repairs more bugs, offering a clear cost-benefit trade-off. HAFixAgent offers a practical recipe for history-aware agentic APR: ground the agent in version control history, prioritize diff-based historical context, and integrate complementary heuristics when needed.

We propose patching for large language models (LLMs) like software versions, a lightweight and modular approach for addressing safety vulnerabilities. While vendors release improved LLM versions, major releases are costly, infrequent, and difficult to tailor to customer needs, leaving released models with known safety gaps. Unlike full-model fine-tuning or major version updates, our method enables rapid remediation by prepending a compact, learnable prefix to an existing model. This "patch" introduces only 0.003% additional parameters, yet reliably steers model behavior toward that of a safer reference model. Across three critical domains (toxicity mitigation, bias reduction, and harmfulness refusal) policy patches achieve safety improvements comparable to next-generation safety-aligned models while preserving fluency. Our results demonstrate that LLMs can be "patched" much like software, offering vendors and practitioners a practical mechanism for distributing scalable, efficient, and composable safety updates between major model releases.

Automated program repair (APR) aims to fix software bugs automatically and plays a crucial role in software development and maintenance. With the recent advances in deep learning (DL), an increasing number of APR techniques have been proposed to leverage neural networks to learn bug-fixing patterns from massive open-source code repositories. Such learning-based techniques usually treat APR as a neural machine translation (NMT) task, where buggy code snippets (i.e., source language) are translated into fixed code snippets (i.e., target language) automatically. Benefiting from the powerful capability of DL to learn hidden relationships from previous bug-fixing datasets, learning-based APR techniques have achieved remarkable performance. In this paper, we provide a systematic survey to summarize the current state-of-the-art research in the learning-based APR community. We illustrate the general workflow of learning-based APR techniques and detail the crucial components, including fault localization, patch generation, patch ranking, patch validation, and patch correctness phases. We then discuss the widely-adopted datasets and evaluation metrics and outline existing empirical studies. We discuss several critical aspects of learning-based APR techniques, such as repair domains, industrial deployment, and the open science issue. We highlight several practical guidelines on applying DL techniques for future APR studies, such as exploring explainable patch generation and utilizing code features. Overall, our paper can help researchers gain a comprehensive understanding about the achievements of the existing learning-based APR techniques and promote the practical application of these techniques. Our artifacts are publicly available at https://github.com/QuanjunZhang/AwesomeLearningAPR.

Large Language Models (LLMs) show promise for automated code repair but often struggle with the complex semantic and structural correctness required. We present SynthFix, a hybrid neural-symbolic framework that improves LLM-based vulnerability repair by unifying code synthesis with compiler-informed symbolic feedback. The core of our approach is an adaptive training strategy where a neural Router Model directs code samples to either Supervised Fine-Tuning (SFT) to learn common patterns or Reward Fine-Tuning (RFT) with symbolic rewards for complex, iterative refinement. On the FixJS (JavaScript) and CodeFlaws (C) benchmarks, SynthFix achieves up to 18% relative improvement in CodeBLEU/CrystalBLEU and 32% in Exact Match over strong SFT and RFT baselines. Our results show that this adaptive combination of training strategies, which mirrors how developers alternate between pattern application and tool feedback, significantly improves the accuracy and efficiency of LLM-based vulnerability repair. Our code and data are available at https://github.com/CoderDoge1108/SynthFix.

The rapid advancement of bug-finding techniques has led to the discovery of more vulnerabilities than developers can reasonably fix, creating an urgent need for effective Automated Program Repair (APR) methods. However, the complexity of modern bugs often makes precise root cause analysis difficult and unreliable. To address this challenge, we propose crash-site repair to simplify the repair task while still mitigating the risk of exploitation. In addition, we introduce a template-guided patch generation approach that significantly reduces the token cost of Large Language Models (LLMs) while maintaining both efficiency and effectiveness. We implement our prototype system, WILLIAMT, and evaluate it against state-of-the-art APR tools. Our results show that, when combined with the top-performing agent CodeRover-S, WILLIAMT reduces token cost by 45.9% and increases the bug-fixing rate to 73.5% (+29.6%) on ARVO, a ground-truth open source software vulnerabilities benchmark. Furthermore, we demonstrate that WILLIAMT can function effectively even without access to frontier LLMs: even a local model running on a Mac M4 Mini achieves a reasonable repair rate. These findings highlight the broad applicability and scalability of WILLIAMT.

Despite significant advances in modeling image priors via diffusion models, 3D-aware image editing remains challenging, in part because the object is only specified via a single image. To tackle this challenge, we propose 3D-Fixup, a new framework for editing 2D images guided by learned 3D priors. The framework supports difficult editing situations such as object translation and 3D rotation. To achieve this, we leverage a training-based approach that harnesses the generative power of diffusion models. As video data naturally encodes real-world physical dynamics, we turn to video data for generating training data pairs, i.e., a source and a target frame. Rather than relying solely on a single trained model to infer transformations between source and target frames, we incorporate 3D guidance from an Image-to-3D model, which bridges this challenging task by explicitly projecting 2D information into 3D space. We design a data generation pipeline to ensure high-quality 3D guidance throughout training. Results show that by integrating these 3D priors, 3D-Fixup effectively supports complex, identity coherent 3D-aware edits, achieving high-quality results and advancing the application of diffusion models in realistic image manipulation. The code is provided at https://3dfixup.github.io/

Large language models of code (Code-LLMs) have recently brought tremendous advances to code completion, a fundamental feature of programming assistance and code intelligence. However, most existing works ignore the possible presence of bugs in the code context for generation, which are inevitable in software development. Therefore, we introduce and study the buggy-code completion problem, inspired by the realistic scenario of real-time code suggestion where the code context contains potential bugs -- anti-patterns that can become bugs in the completed program. To systematically study the task, we introduce two datasets: one with synthetic bugs derived from semantics-altering operator changes (buggy-HumanEval) and one with realistic bugs derived from user submissions to coding problems (buggy-FixEval). We find that the presence of potential bugs significantly degrades the generation performance of the high-performing Code-LLMs. For instance, the passing rates of CodeGen-2B-mono on test cases of buggy-HumanEval drop more than 50% given a single potential bug in the context. Finally, we investigate several post-hoc methods for mitigating the adverse effect of potential bugs and find that there remains a large gap in post-mitigation performance.

Language models for program synthesis are usually trained and evaluated on programming competition datasets (MBPP, APPS). However, these datasets are limited in size and quality, while these language models are extremely data hungry. Additionally, the language models have a misaligned program synthesis process compared to humans. While humans iteratively develop code with the help of a compiler, most program synthesis models currently produce code in one go. To solve these issues, we introduce a bootstrapping algorithm for program synthesis, that supports teaching models how to repair. We show that bootstrapping consistently outperforms regular fine-tuning. Compared to other work, our bootstrapped model performs on par with fine-tuned models that are 68\% larger. Notably, bootstrapping with repairing also improves non-repairing performance compared to regular bootstrapping during inference. However, on our models, repairing during inference is likely inferior to simply sampling the same number of solutions. Furthermore, we find that there are issues with the example test cases in the training portion of the APPS dataset that are valuable to the community, as many repairing and reinforcement learning methods rely on them.

Coding agents have made substantial progress on software engineering tasks that modify existing codebases, including bug fixing and feature implementation. However, constructing a complete program from scratch remains a major challenge: even the frontier models evaluated on ProgramBench fully resolve fewer than 1% of tasks. One obstacle is the lack of scalable training environments for this from-scratch setting, spanning the whole software engineering life cycle, as existing environment-construction frameworks focus only on a single phase in software development. To address this gap, we introduce MindForge, an automated pipeline that converts open-source command-line programs into source-free environments that expose only a compiled reference executable and its documentation. Using MindForge, we construct training environments from repositories disjoint from those in ProgramBench, and curate a high-quality data recipe consisting of program synthesis trajectories using GLM-5.2 as the teacher agent. Fine-tuning Qwen3.6-27B on these trajectories increases its ProgramBench average test pass rate from 37.98% to 49.51%, achieving performance comparable to substantially larger frontier models. Moreover, the fine-tuned model consistently improves over the base model across all seven unseen software engineering benchmarks, spanning long-horizon repository generation and translation, bug fixing, feature implementation, and cross-language issue resolution, with absolute gains of 31.00 points on RepoZero-C2Rust, 14.16 on DeepSWE, 10.70/4.56 on NL2Repo-Bench (with/without tests), 5.04 on SWE-bench Verified, 5.93 on SWE-bench Pro, 5.22 on SWE-bench Multilingual, and 4.94 on FeatBench.

In rapid release development processes, patches that fix critical issues, or implement high-value features are often promoted directly from the development channel to a stabilization channel, potentially skipping one or more stabilization channels. This practice is called patch uplift. Patch uplift is risky, because patches that are rushed through the stabilization phase can end up introducing regressions in the code. This paper examines patch uplift operations at Mozilla, with the aim to identify the characteristics of uplifted patches that introduce regressions. Through statistical and manual analyses, we quantitatively and qualitatively investigate the reasons behind patch uplift decisions and the characteristics of uplifted patches that introduced regressions. Additionally, we interviewed three Mozilla release managers to understand organizational factors that affect patch uplift decisions and outcomes. Results show that most patches are uplifted because of a wrong functionality or a crash. Uplifted patches that lead to faults tend to have larger patch size, and most of the faults are due to semantic or memory errors in the patches. Also, release managers are more inclined to accept patch uplift requests that concern certain specific components, and-or that are submitted by certain specific developers.

Automated program repair (APR) agents are transitioning from research benchmarks to developer workflows, yet they still begin with bug reports written for human developers. While decades of research have established what makes a good bug report for humans (e.g., steps to reproduce, stack traces), it remains unclear whether these features transfer to LLM-based agents. We study this question in two analyses. First, we use statistical modeling to examine associations between 27 bug-report features and repair success across 433 SWE-bench Verified issues attempted by 87 repair agents. We find that fix suggestions, reproduction scripts, repository source code, and localization info are associated with higher resolution likelihood, while longer reports are associated with lower odds. Second, we conduct controlled ablations across 2 models and 17 problem-statement mutations on SWE-bench Pro, varying the information available to an agent while holding the underlying task fixed. We remove or isolate selected bug-report content, delete fault-localization cues, and test structural changes that flatten lists or remove section headers. We find that both models depend on localization cues and expected behavior, and that structural changes alone can reduce solve rates, even without removing any content. The two models diverge in how they handle missing information: Qwen searches more widely and can exhaust its turn budget, while Gemma commits to a plausible interpretation early and patches on it. Our findings indicate that a good bug report for an agent overlaps with, but is not identical to, a good report for a human: agents benefit most from concrete, executable, and well-localized information, whereas some qualities long emphasized for human readers, such as natural language steps to reproduce and readable descriptions, contribute little or even correlate with lower success.

Large language models (LLMs) are effective for automated program repair, but plausible patches that pass the full test suite often rewrite more code than necessary, increasing review and maintenance costs. This over-editing is common because most bugs are localized, while standard supervised fine-tuning provides no explicit signal about which tokens should be preserved and which should be changed. We propose PAFT, a preservation-aware fine-tuning method for minimal-edit program repair. PAFT derives token-level preservation signals by aligning buggy and fixed code, combines them with full-sequence masking, and applies an edit-difficulty curriculum. Across Defects4J and HumanEval-Java, PAFT improves pass@1 by up to 65.6% over standard supervised fine-tuning (StdFT) while reducing average edit distance (AED) by up to 32.6%. On Defects4J with DeepSeek-Coder-6.7B, PAFT also outperforms AdaPatcher, a strong preference-based repair baseline, improving pass@1 from 5.9% to 10.1% while reducing median AED from 61.0 to 42.0. Overall, PAFT preserves stable context and concentrates edits on faulty regions, yielding smaller, more localized, plausible patches without inference-time search, reranking, or post-processing.

Not a day goes by without hearing about the impressive feats of large language models (LLMs), and equally, not a day passes without hearing about their challenges. LLMs are notoriously vulnerable to biases in their dataset, leading to issues such as toxicity. While domain-adaptive training has been employed to mitigate these issues, these techniques often address all model parameters indiscriminately during the repair process, resulting in poor repair quality and reduced model versatility. In this paper, we introduce a novel dynamic slicing-based intent-aware LLM repair strategy, IRepair. This approach selectively targets the most error-prone sections of the model for repair. Specifically, we propose dynamically slicing the model's most sensitive layers that require immediate attention, concentrating repair efforts on those areas. This method enables more effective repairs with potentially less impact on the model's overall performance by altering a smaller portion of the model. We evaluated our technique on three models from the GPT2 and GPT-Neo families, with parameters ranging from 800M to 1.6B, in a toxicity mitigation setup. Our results show that IRepair repairs errors 43.6% more effectively while causing 46% less disruption to general performance compared to the closest baseline, direct preference optimization. Our empirical analysis also reveals that errors are more concentrated in a smaller section of the model, with the top 20% of layers exhibiting 773% more error density than the remaining 80\%. This highlights the need for selective repair. Additionally, we demonstrate that a dynamic selection approach is essential for addressing errors dispersed throughout the model, ensuring a robust and efficient repair.

A fundamental skill among human developers is the ability to understand and reason about program execution. As an example, a programmer can mentally simulate code execution in natural language to debug and repair code (aka. rubber duck debugging). However, large language models (LLMs) of code are typically trained on the surface textual form of programs, thus may lack a semantic understanding of how programs execute at run-time. To address this issue, we propose NExT, a method to teach LLMs to inspect the execution traces of programs (variable states of executed lines) and reason about their run-time behavior through chain-of-thought (CoT) rationales. Specifically, NExT uses self-training to bootstrap a synthetic training set of execution-aware rationales that lead to correct task solutions (e.g., fixed programs) without laborious manual annotation. Experiments on program repair tasks based on MBPP and HumanEval demonstrate that NExT improves the fix rate of a PaLM 2 model, by 26.1% and 14.3% absolute, respectively, with significantly improved rationale quality as verified by automated metrics and human raters. Our model can also generalize to scenarios where program traces are absent at test-time.

Recent progress in large language models (LLMs) has advanced automatic code generation, yet most approaches rely on direct, single-step translation from problem descriptions to code, disregarding structured software engineering practices. We introduce a lifecycle-aware framework that systematically incorporates intermediate artifacts such as requirements analysis, state machine modeling, and pseudocode into both the training and inference stages. This design aligns code generation with standard software development phases and enables more structured reasoning. Experiments show that lifecycle-level fine-tuning improves code correctness by up to 75% over the same model before fine-tuning, with performance gains compounding across intermediate stages. Multi-step inference consistently surpasses single-step generation, demonstrating the effectiveness of intermediate scaffolding. Notably, open-source LLMs, once fine-tuned under our framework, match or slightly outperform models pretrained on code. When applied to DeepSeek-Coder-1.3B, our framework yields relative CodeBLEU improvements of 34.3%, 20.0%, 11.2%, and 22.3% over ChatGPT-3.5, ChatGPT-4o-mini, DeepSeek-R1, and LLaMA-8B, respectively. Our pipeline also proves robust with up to 80\% less training data, confirming its resilience. Ablation studies further reveal that each intermediate artifact contributes distinctly to final code quality, with state machine modeling yielding the most substantial impact. Our source code and detailed experimental data are available at https://anonymous.4open.science/r/Lifecycle-Aware-3CCB.

Pretrained models are the standard starting point for training. This approach consistently outperforms the use of a random initialization. However, pretraining is a costly endeavour that few can undertake. In this paper, we create better base models at hardly any cost, by fusing multiple existing fine tuned models into one. Specifically, we fuse by averaging the weights of these models. We show that the fused model results surpass the pretrained model ones. We also show that fusing is often better than intertraining. We find that fusing is less dependent on the target task. Furthermore, weight decay nullifies intertraining effects but not those of fusing.

Artificial Intelligence (AI) in healthcare, especially in white blood cell cancer diagnosis, is hindered by two primary challenges: the lack of large-scale labeled datasets for white blood cell (WBC) segmentation and outdated segmentation methods. These challenges inhibit the development of more accurate and modern techniques to diagnose cancer relating to white blood cells. To address the first challenge, a semi-supervised learning framework should be devised to efficiently capitalize on the scarcity of the dataset available. In this work, we address this issue by proposing a novel self-training pipeline with the incorporation of FixMatch. Self-training is a technique that utilizes the model trained on labeled data to generate pseudo-labels for the unlabeled data and then re-train on both of them. FixMatch is a consistency-regularization algorithm to enforce the model's robustness against variations in the input image. We discover that by incorporating FixMatch in the self-training pipeline, the performance improves in the majority of cases. Our performance achieved the best performance with the self-training scheme with consistency on DeepLab-V3 architecture and ResNet-50, reaching 90.69%, 87.37%, and 76.49% on Zheng 1, Zheng 2, and LISC datasets, respectively.

OpenAI's Codex, a GPT-3 like model trained on a large code corpus, has made headlines in and outside of academia. Given a short user-provided description, it is capable of synthesizing code snippets that are syntactically and semantically valid in most cases. In this work, we want to investigate whether Codex is able to localize and fix bugs, a task of central interest in the field of automated program repair. Our initial evaluation uses the multi-language QuixBugs benchmark (40 bugs in both Python and Java). We find that, despite not being trained for APR, Codex is surprisingly effective, and competitive with recent state of the art techniques. Our results also show that Codex is slightly more successful at repairing Python than Java.

Issue localization, the process of identifying code locations that need modification to resolve software issues, is a critical yet challenging task in software development. The semantic gap between natural language issue descriptions and faulty code requires complex multi-hop reasoning through code dependencies. Existing LLM-based agents attempt to address this by integrating repository retrieval tools. However, this transforms issue localization into a demanding task we call Repo Deep Search, which requires the LLM to effectively utilize various repository retrieval tools throughout a multi-step reasoning and navigation process. To tackle this challenge, we present ToolTrain, a two-stage tool-integrated training framework combining rejection-sampled supervised fine-tuning and tool-integrated reinforcement learning to enhance LLMs' ability to use retrieval tools for issue localization. Experimental results show that ToolTrain-trained models achieve state-of-the-art performance, with our 32B model even surpassing Claude-3.7 on function-level localization. The results also show that improved localization performance translates to better end-to-end issue resolution performance. This further demonstrates that training for issue localization is a viable and effective strategy for improving automated software development.

Large language models increasingly write and repair production code, yet evidence is mounting that their test-passing patches leave codebases harder to maintain. We identify one concrete source: deletion avoidance, the systematic tendency to retain code that an intended edit requires removing. Across the five leading models on the official SWE-bench Verified leaderboard, deletion recall against the developer patch reaches at most 71.7% even on tasks all five solve, and models reach the right file for over 92% of required deletions but cut the exact line in under 52% of cases. Instead, 29.0% of passing patches wrap the targeted code in a guard or fallback, a pattern we call Guard-and-Go. Such patches pass because the original tests rarely check removal: when we retrofit 34 Verified tasks with tests that fail if the targeted code remains, four frontier models spanning closed and open weights fall from 63.2% to 41.9%. Because real repairs mix removal with addition, we curate CanItDelete, a benchmark of 200 tasks mined from real commits whose entire required edit is deletion. Even with the addition work gone, the best model still fails one task in five, and smaller open models fall to 18.0%. We then ablate GPT-5.6 Sol under four cumulative prompts; success moves little until we supply the exact lines, which nearly eliminate incomplete deletion yet raise success only to 80.5% because the model then deletes beyond the spans or adds code instead. Finally, through a pilot study we show one potential fix: teaching deletion during post-training reduces deletion avoidance and improves broader code-editing performance, suggesting the behavior is undertrained rather than beyond reach.

Exemplar methods separate a mixture by picking one learned spectrum per source and deforming it until it explains the observation, making one deformation class both reconstructor and selector. We show that the second role is empty as soon as the class can interpolate: the rule then ranks candidates on its regulariser, a choice made before the data, and the estimates sum back to the mixture whichever candidate wins. The condition is a parameter count, so the diagnosis runs before any experiment. On free per-bin deformation of complex spectra it explains the observed pathologies at once: a criterion that ranks candidates by their loudness, and half an output that is a mask on the mixture rather than an exemplar. The same theorem prescribes the repair, a selection class poorer than the reconstruction class: one complex gain and one pure delay rank the candidates, and a local combination of the best-aligned atoms, fitted jointly in closed form, rebuilds them. On MUSDB18 against the exact ceiling of the masking class, the distance between the criterion and an oracle inside its own candidate pool falls under the rigid selector from 6.2-7.7 to 0.5-2.8 dB, though only 0.9-1.2 dB of that reaches the output, and the per-frame latency of the deployed rule by a factor of 47 to 806. One lock remains, quantified: atoms are scored against the mixture, so the score carries a term for the other source that absorbs the capacity the reconstruction class gains, leaving the output 10.0 dB under the ceiling. Ranking hypotheses by the residual of a fit free enough to interpolate ranks them on the regulariser alone.

Large language models (LLMs) and LLM-based Agents have been applied to fix bugs automatically, demonstrating the capability in addressing software defects by engaging in development environment interaction, iterative validation and code modification. However, systematic analysis of these agent and non-agent systems remain limited, particularly regarding performance variations among top-performing ones. In this paper, we examine seven proprietary and open-source systems on the SWE-bench Lite benchmark for automated bug fixing. We first assess each system's overall performance, noting instances solvable by all or none of these sytems, and explore why some instances are uniquely solved by specific system types. We also compare fault localization accuracy at file and line levels and evaluate bug reproduction capabilities, identifying instances solvable only through dynamic reproduction. Through analysis, we concluded that further optimization is needed in both the LLM itself and the design of Agentic flow to improve the effectiveness of the Agent in bug fixing.

Weight initialization plays an important role in neural network training. Widely used initialization methods are proposed and evaluated for networks that are trained from scratch. However, the growing number of pretrained models now offers new opportunities for tackling this classical problem of weight initialization. In this work, we introduce weight selection, a method for initializing smaller models by selecting a subset of weights from a pretrained larger model. This enables the transfer of knowledge from pretrained weights to smaller models. Our experiments demonstrate that weight selection can significantly enhance the performance of small models and reduce their training time. Notably, it can also be used together with knowledge distillation. Weight selection offers a new approach to leverage the power of pretrained models in resource-constrained settings, and we hope it can be a useful tool for training small models in the large-model era. Code is available at https://github.com/OscarXZQ/weight-selection.

Translating C code into safe, idiomatic Rust is a longstanding software-engineering goal because it can eliminate entire classes of memory-safety vulnerabilities while preserving the functional behavior of legacy systems. Large language models (LLMs) have shown promise for this task but typically underperform when applied off-the-shelf, since general-purpose pretraining rarely emphasizes idiomatic Rust generation, cross-language semantic equivalence, or the ability to reason about and repair compiler/runtime feedback. In this report we describe a three-stage fine-tuning curriculum applied to Qwen3-27B that is designed to progressively specialize the model for the C-to-Rust (C2Rust) translation task: (1) continued pretraining on Rust-centric corpora to strengthen the model's prior over idiomatic Rust syntax and standard-library usage; (2) supervised fine-tuning (SFT) on the microsoft/Verus_Training_Data dataset to instill debugging and self-repair behavior over Rust code; and (3) task-specific SFT on paired C/Rust solutions derived from LeetCode problems to teach direct semantic translation. We evaluate the resulting model using the agentic, static-analysis-guided verification framework of SACTOR, which performs structure-aware, two-phase (unidiomatic to idiomatic) translation with foreign-function-interface (FFI)-based end-to-end (E2E) testing. We report success rate, idiomaticity (Clippy lint counts, unsafe-code fraction), and failure-mode analyses, and compare our fine-tuned model against baseline Qwen3-27B and other LLMs evaluated under the same framework.

Proper weight initialization prior to training has historically been one of the key factors that helped kick off the deep learning revolution. Initialization is even more crucial in "reservoir computing", where the weights of a readout layer are learned linearly while the reservoir weights are fixed and largely determine the richness, stability and memory of the resulting dynamics. In the infinite-width limit it has been shown that meaningful initializations are those sitting at an effective critical point of the randomly initialized model. The phase transition is controlled by the weight variance g^2 and separates an ordered phase from a chaotic one where information progressively degrades. Here we derive a simple criterion to estimate the critical g_c for a broad class of recurrent architectures and we show that it closely tracks the gain at which a gated-RNN reservoir achieves peak performance on a chaotic forecasting task. Finally, we argue that our criterion can serve as a design principle for future initialization schemes.

Automated Program Repair (APR) can help developers automatically generate patches for bugs. Due to the impressive performance obtained using Large Pre-Trained Language Models (LLMs) on many code related tasks, researchers have started to directly use LLMs for APR. However, prior approaches simply repeatedly sample the LLM given the same constructed input/prompt created from the original buggy code, which not only leads to generating the same incorrect patches repeatedly but also miss the critical information in testcases. To address these limitations, we propose conversational APR, a new paradigm for program repair that alternates between patch generation and validation in a conversational manner. In conversational APR, we iteratively build the input to the model by combining previously generated patches with validation feedback. As such, we leverage the long-term context window of LLMs to not only avoid generating previously incorrect patches but also incorporate validation feedback to help the model understand the semantic meaning of the program under test. We evaluate 10 different LLM including the newly developed ChatGPT model to demonstrate the improvement of conversational APR over the prior LLM for APR approach.

As machine learning tools progress, the inevitable question arises: How can machine learning help us write better code? With significant progress being achieved in natural language processing with models like GPT-3 and Bert, the applications of natural language processing techniques to code are starting to be explored. Most of the research has been focused on automatic program repair (APR), and while the results on synthetic or highly filtered datasets are promising, such models are hard to apply in real-world scenarios because of inadequate bug localization. We propose BigIssue: a benchmark for realistic bug localization. The goal of the benchmark is two-fold. We provide (1) a general benchmark with a diversity of real and synthetic Java bugs and (2) a motivation to improve bug localization capabilities of models through attention to the full repository context. With the introduction of BigIssue, we hope to advance the state of the art in bug localization, in turn improving APR performance and increasing its applicability to the modern development cycle.

Static analysis tools are traditionally used to detect and flag programs that violate properties. We show that static analysis tools can also be used to perturb programs that satisfy a property to construct variants that violate the property. Using this insight we can construct paired data sets of unsafe-safe program pairs, and learn strategies to automatically repair property violations. We present a system called \sysname, which automatically repairs information flow vulnerabilities using this approach. Since information flow properties are non-local (both to check and repair), \sysname also introduces a novel domain specific language (DSL) and strategy learning algorithms for synthesizing non-local repairs. We use \sysname to synthesize strategies for repairing two types of information flow vulnerabilities, unvalidated dynamic calls and cross-site scripting, and show that \sysname successfully repairs several hundred vulnerabilities from open source {\sc JavaScript} repositories, outperforming neural baselines built using {\sc CodeT5} and {\sc Codex}. Our datasets can be downloaded from http://aka.ms/StaticFixer.

Accurate identification of software vulnerabilities is crucial for system integrity. Vulnerability datasets, often derived from the National Vulnerability Database (NVD) or directly from GitHub, are essential for training machine learning models to detect these security flaws. However, these datasets frequently suffer from significant noise, typically 40% to 75%, due primarily to the automatic and indiscriminate labeling of all changes in vulnerability-fixing commits (VFCs) as vulnerability-related. This misclassification occurs because not all changes in a commit aimed at fixing vulnerabilities pertain to security threats; many are routine updates like bug fixes or test improvements. This paper introduces the first methodology that uses the Large Language Model (LLM) with a heuristic enhancement to automatically identify vulnerability-fixing changes from VFCs, achieving an F1-score of 0.82. VulSifter was applied to a large-scale study, where we conducted a crawl of 127,063 repositories on GitHub, resulting in the acquisition of 5,352,105 commits. VulSifter involves utilizing an LLM to comprehend code semantics and contextual information, while applying heuristics to filter out unrelated changes. We then developed CleanVul, a high-quality dataset comprising 8,198 functions using our LLM heuristic enhancement approach, demonstrating Correctness (90.6%) comparable to established datasets such as SVEN and PrimeVul. To evaluate the CleanVul dataset, we conducted experiments focusing on fine-tuning various LLMs on CleanVul and other high-quality datasets. Evaluation results reveal that LLMs fine-tuned on CleanVul not only exhibit enhanced accuracy but also superior generalization capabilities compared to those trained on uncleaned datasets. Specifically, models trained on CleanVul and tested on PrimeVul achieve accuracy higher than those trained and tested exclusively on PrimeVul.

Code large language models (LLMs) enhance programming by understanding and generating code across languages, offering intelligent feedback, bug detection, and code updates through reflection, improving development efficiency and accessibility. While benchmarks (e.g. HumanEval/LiveCodeBench) evaluate code generation and real-world relevance, previous works ignore the scenario of modifying code in repositories. Considering challenges remaining in improving reflection capabilities and avoiding data contamination in dynamic benchmarks, we introduce LiveRepoReflection, a challenging benchmark for evaluating code understanding and generation in multi-file repository contexts, featuring 1,888 rigorously filtered test cases across 6 programming languages to ensure diversity, correctness, and high difficulty. Further, we create RepoReflection-Instruct, a large-scale, quality-filtered instruction-tuning dataset derived from diverse sources, used to train RepoReflectionCoder through a two-turn dialogue process involving code generation and error-driven repair. The leaderboard evaluates over 40 LLMs to reflect the model performance of repository-based code reflection.

Optimizing the performance of large-scale software repositories demands expertise in code reasoning and software engineering (SWE) to reduce runtime while preserving program correctness. However, most benchmarks emphasize what to fix rather than how to fix code. We introduce SWE-fficiency, a benchmark for evaluating repository-level performance optimization on real workloads. Our suite contains 498 tasks across nine widely used data-science, machine-learning, and HPC repositories (e.g., numpy, pandas, scipy): given a complete codebase and a slow workload, an agent must investigate code semantics, localize bottlenecks and relevant tests, and produce a patch that matches or exceeds expert speedup while passing the same unit tests. To enable this how-to-fix evaluation, our automated pipeline scrapes GitHub pull requests for performance-improving edits, combining keyword filtering, static analysis, coverage tooling, and execution validation to both confirm expert speedup baselines and identify relevant repository unit tests. Empirical evaluation of state-of-the-art agents reveals significant underperformance. On average, agents achieve less than 0.15x the expert speedup: agents struggle in localizing optimization opportunities, reasoning about execution across functions, and maintaining correctness in proposed edits. We release the benchmark and accompanying data pipeline to facilitate research on automated performance engineering and long-horizon software reasoning.

Program errors can occur in any type of programming, and can manifest in a variety of ways, such as unexpected output, crashes, or performance issues. And program error diagnosis can often be too abstract or technical for developers to understand, especially for beginners. The goal of this paper is to present a novel machine-learning approach for Multi-task Program Error Repair and Explanatory Diagnosis (mPRED). A pre-trained language model is used to encode the source code, and a downstream model is specifically designed to identify and repair errors. Programs and test cases will be augmented and optimized from several perspectives. Additionally, our approach incorporates a "chain of thoughts" method, which enables the models to produce intermediate reasoning explanations before providing the final correction. To aid in visualizing and analyzing the program structure, we use a graph neural network for program structure visualization. Overall, our approach offers a promising approach for repairing program errors across different programming languages and providing helpful explanations to programmers.

In many real-world deployments of machine learning systems, data arrive piecemeal. These learning scenarios may be passive, where data arrive incrementally due to structural properties of the problem (e.g., daily financial data) or active, where samples are selected according to a measure of their quality (e.g., experimental design). In both of these cases, we are building a sequence of models that incorporate an increasing amount of data. We would like each of these models in the sequence to be performant and take advantage of all the data that are available to that point. Conventional intuition suggests that when solving a sequence of related optimization problems of this form, it should be possible to initialize using the solution of the previous iterate -- to "warm start" the optimization rather than initialize from scratch -- and see reductions in wall-clock time. However, in practice this warm-starting seems to yield poorer generalization performance than models that have fresh random initializations, even though the final training losses are similar. While it appears that some hyperparameter settings allow a practitioner to close this generalization gap, they seem to only do so in regimes that damage the wall-clock gains of the warm start. Nevertheless, it is highly desirable to be able to warm-start neural network training, as it would dramatically reduce the resource usage associated with the construction of performant deep learning systems. In this work, we take a closer look at this empirical phenomenon and try to understand when and how it occurs. We also provide a surprisingly simple trick that overcomes this pathology in several important situations, and present experiments that elucidate some of its properties.

Agentic coding assistants are increasingly given extra capabilities, such as browser based testing tools and design oriented system prompts, on the assumption that more capability yields better software. This study tested that assumption directly. Ninety independent agent runs built the same application, a real time retrospective board, from one detailed specification, each scored on a fixed 14 criterion functional rubric (42 point maximum) and a visual quality review. The runs spanned several model generations, two agent harnesses, two reasoning effort levels, a testing tool, and two design oriented prompts. Capability tier dominated: frontier models clustered near the ceiling while a low cost local model fell to 24 to 37 points. A criterion level analysis revealed what run totals conceal. Container deployment was the dominant defect, failing first try in 44 percent of runs, with its failure rate shifting sharply across model generations while mean totals moved less than a point. The testing tool raised cost by 42 to 68 percent without improving functional score or reliability, even on interface visible criteria. Raising reasoning effort from High to xHigh lifted first try perfect runs from 28 percent to 89 percent and cut corrective prompts about five fold, for 9 to 29 percent more cost. A design oriented prompt raised visual quality, 4.5 versus 3.0 on a 5 point scale, without lifting function, and a one paragraph paraphrase of its directive reproduced the entire lift. The practical lesson is to match the fix to the failure: most first run failures came from weak reasoning, which a stronger model or more effort prevents, not from visible flaws a checking tool would catch.

Automated program repair (APR) using deep learning techniques has become an important area of research in recent years, aiming to automatically generate bug-fixing patches that can improve software reliability and maintainability. However, most existing methods either target a single language or require high computational resources to train multilingual models. In this paper, we propose T5APR, a novel neural program repair approach that provides a unified solution for bug fixing across multiple programming languages. T5APR leverages CodeT5, a powerful pre-trained text-to-text transformer model, and adopts a checkpoint ensemble strategy to improve patch recommendation. We conduct comprehensive evaluations on six well-known benchmarks in four programming languages (Java, Python, C, JavaScript), demonstrating T5APR's competitiveness against state-of-the-art techniques. T5APR correctly fixes 1,985 bugs, including 1,442 bugs that none of the compared techniques has fixed. We further support the effectiveness of our approach by conducting detailed analyses, such as comparing the correct patch ranking among different techniques. The findings of this study demonstrate the potential of T5APR for use in real-world applications and highlight the importance of multilingual approaches in the field of APR.

Large language models (LLMs) exhibit strong performance on self-contained programming tasks. However, they still struggle with repository-level software engineering (SWE), which demands (1) deep codebase navigation with effective context management for accurate localization, and (2) systematic approaches for iterative, test-driven code modification to resolve issues. To address these challenges, we propose SWE-Adept, an LLM-based two-agent framework where a localization agent identifies issue-relevant code locations and a resolution agent implements the corresponding fixes. For issue localization, we introduce agent-directed depth-first search that selectively traverses code dependencies. This minimizes issue-irrelevant content in the agent's context window and improves localization accuracy. For issue resolution, we employ adaptive planning and structured problem solving. We equip the agent with specialized tools for progress tracking and Git-based version control. These tools interface with a shared working memory that stores code-state checkpoints indexed by execution steps, facilitating precise checkpoint retrieval. This design enables reliable agent-driven version-control operations for systematic issue resolution, including branching to explore alternative solutions and reverting failed edits. Experiments on SWE-Bench Lite and SWE-Bench Pro demonstrate that SWE-Adept consistently outperforms prior approaches in both issue localization and resolution, improving the end-to-end resolve rate by up to 4.7%.

Large Language Models (LLMs) have shown remarkable aptitude in code generation but still struggle on challenging programming tasks. Self-repair -- in which the model debugs and fixes mistakes in its own code -- has recently become a popular way to boost performance in these settings. However, only very limited studies on how and when self-repair works effectively exist in the literature, and one might wonder to what extent a model is really capable of providing accurate feedback on why the code is wrong when that code was generated by the same model. In this paper, we analyze GPT-3.5 and GPT-4's ability to perform self-repair on APPS, a challenging dataset consisting of diverse coding challenges. To do so, we first establish a new evaluation strategy dubbed pass@t that measures the pass rate of the tasks against the total number of tokens sampled from the model, enabling a fair comparison to purely sampling-based approaches. With this evaluation strategy, we find that the effectiveness of self-repair is only seen in GPT-4. We also observe that self-repair is bottlenecked by the feedback stage; using GPT-4 to give feedback on the programs generated by GPT-3.5 and using expert human programmers to give feedback on the programs generated by GPT-4, we unlock significant performance gains.

This paper reports a single, fully instrumented case study of a large-scale architectural refactoring by an AI coding agent under a specification-first protocol, with no human review of the generated code and no pre-existing oracle to validate the target behaviour. The task, dismantling a central invariant across a large interdependent codebase, was assessed by the author as effectively infeasible through incremental refactoring, the kind of change that conventionally calls for a rewrite instead. Under the protocol described here, the agent completed it successfully. The system is a 717,725-line production TypeScript application across 3,648 files. The task required dismantling a core lifetime invariant: the guarantee that a UI panel remains open for the duration of an AI request. The target behaviour was that a streaming generation survives the closing of its panel and can be reattached, on reopening, to the same live stream with no loss or duplication. The protocol: formal specification by the agent, 14 refinement cycles auditing that specification against the source code, atomic implementation, a compile/test feedback loop, then 17 verification cycles auditing the code against the frozen specification. Across 31 audit passes, 201 defects were corrected before any human executed the program. The convergence criterion was empirical: two consecutive verification passes returning zero findings. The change touched 189 files (31 new); with the extraction phase, the two commits total 288 files, 34,770 insertions, 16,422 deletions. Across the first and roughly thirty later sessions, the software behaved as specified, no bug observed. Elapsed: three days; cost: USD 2,430. The full specification and raw session logs, 1,500+ pages in French, are published as evidence, allowing inspection of the process and submission to a language model for consistency checking.

With the growing interest on Large Language Models (LLMs) for fault localization and program repair, ensuring the integrity and generalizability of the LLM-based methods becomes paramount. The code in existing widely-adopted benchmarks for these tasks was written before the the bloom of LLMs and may be included in the training data of existing popular LLMs, thereby suffering from the threat of data leakage, leading to misleadingly optimistic performance metrics. To address this issue, we introduce "ConDefects", a novel dataset of real faults meticulously curated to eliminate such overlap. ConDefects contains 1,254 Java faulty programs and 1,625 Python faulty programs. All these programs are sourced from the online competition platform AtCoder and were produced between October 2021 and September 2023. We pair each fault with fault locations and the corresponding repaired code versions, making it tailored for in fault localization and program repair related research. We also provide interfaces for selecting subsets based on different time windows and coding task difficulties. While inspired by LLM-based tasks, ConDefects can be adopted for benchmarking ALL types of fault localization and program repair methods. The dataset is publicly available, and a demo video can be found at https://www.youtube.com/watch?v=22j15Hj5ONk.

Automated generate-and-validate (G&V) program repair techniques typically rely on hard-coded rules, only fix bugs following specific patterns, and are hard to adapt to different programming languages. We propose ENCORE, a new G&V technique, which uses ensemble learning on convolutional neural machine translation (NMT) models to automatically fix bugs in multiple programming languages. We take advantage of the randomness in hyper-parameter tuning to build multiple models that fix different bugs and combine them using ensemble learning. This new convolutional NMT approach outperforms the standard long short-term memory (LSTM) approach used in previous work, as it better captures both local and long-distance connections between tokens. Our evaluation on two popular benchmarks, Defects4J and QuixBugs, shows that ENCORE fixed 42 bugs, including 16 that have not been fixed by existing techniques. In addition, ENCORE is the first G&V repair technique to be applied to four popular programming languages (Java, C++, Python, and JavaScript), fixing a total of 67 bugs across five benchmarks.

Large language models frequently fail to produce correct code on their first attempt, yet most benchmarks evaluate them in a single-shot setting. We investigate iterative self-repair (feeding execution errors back to the model for correction) across seven models spanning three families and both open-weight and proprietary providers: Llama 3.1 8B, Llama 3.3 70B, Llama 4 Scout (MoE, 16 experts), Llama 4 Maverick (MoE, 128 experts), Qwen3 32B, Gemini 2.5 Flash, and Gemini 2.5 Pro. On HumanEval (164 problems) and MBPP Sanitized (257 problems) with up to five attempts, self-repair universally improves pass rates: +4.9 to +17.1 pp on HumanEval and +16.0 to +30.0 pp on MBPP. Gemini 2.5 Flash achieves the highest final pass rates (96.3% HumanEval, 93.8% MBPP). Most gains concentrate in the first two rounds.Error-type analysis shows assertion errors (logical mistakes) are the hardest to repair at ~45%, while syntax and name errors are repaired at substantially higher rates, connecting to broader findings on the limits of LLM self-correction. Prior work found that weaker models fail at self-repair or require fine-tuning; we show that modern instruction-tuned models succeed with prompting alone, even at 8B scale. We also provide the first comparison of dense and MoE architectures for self-repair, and extend the repair-vs-resampling tradeoff analysis to modern models. A prompt ablation reveals chain-of-thought repair yields up to +5.5 pp additional self-repair gain (measured as improvement in repair delta) over minimal prompting for capable models.

Repository-level fault localization (FL) and automated program repair (APR) require an agent to identify the relevant code units across files, follow call and data dependencies, and generate a valid patch. Existing graph-based systems provide structural representations of repositories (files, classes, functions and their relationships) but do not model how variable values flow within procedures, leaving agents without the semantic precision needed for function- and line-level localization. We present ARISE (Agentic Repository-level Issue Solving Engine), which augments an LLM-based agent with a multi-granularity program graph that extends structural relationships down to statement-level nodes connected by intra-procedural definition-use edges. ARISE exposes this graph through a three-tier tool API, which brings data-flow slicing as a first-class, queryable agent primitive that allows the model to trace, in a single call, which statements define or consume a variable of interest. We evaluate on SWE-bench Lite (300 real GitHub issues, 11 Python repositories) using Qwen2.5-Coder-32B-Instruct as the backbone. Compared to the unmodified SWE-agent baseline, ARISE improves Function Recall@1 by 17.0 points and Line Recall@1 by 15.0 points. These localization gains translate directly into repair success, with ARISE achieving 22.0% Pass@1 (66/300), a 4.7 percentage-point improvement over SWE-agent. Controlled ablations confirm that the improvement is driven by the data-flow graph rather than the tool schema, and that large code models consume structured slice output directly without requiring a natural-language summarization layer. The graph builder and slicing API are designed as a framework-agnostic, drop-in toolset for future APR research.

Deep neural networks trained on nonstationary data must balance stability (i.e., retaining prior knowledge) and plasticity (i.e., adapting to new tasks). Standard reinitialization methods, which reinitialize weights toward their original values, are widely used but difficult to tune: conservative reinitializations fail to restore plasticity, while aggressive ones erase useful knowledge. We propose FIRE, a principled reinitialization method that explicitly balances the stability-plasticity tradeoff. FIRE quantifies stability through Squared Frobenius Error (SFE), measuring proximity to past weights, and plasticity through Deviation from Isometry (DfI), reflecting weight isotropy. The reinitialization point is obtained by solving a constrained optimization problem, minimizing SFE subject to DfI being zero, which is efficiently approximated by Newton-Schulz iteration. FIRE is evaluated on continual visual learning (CIFAR-10 with ResNet-18), language modeling (OpenWebText with GPT-0.1B), and reinforcement learning (HumanoidBench with SAC and Atari games with DQN). Across all domains, FIRE consistently outperforms both naive training without intervention and standard reinitialization methods, demonstrating effective balancing of the stability-plasticity tradeoff.

Accurate project localization (e.g., files and functions) for issue resolution is a critical first step in software maintenance. However, existing benchmarks for issue localization, such as SWE-Bench and LocBench, are limited. They focus predominantly on pull-request issues and code locations, ignoring other evidence and non-code files such as commits, comments, configurations, and documentation. To address this gap, we introduce MULocBench, a comprehensive dataset of 1,100 issues from 46 popular GitHub Python projects. Comparing with existing benchmarks, MULocBench offers greater diversity in issue types, root causes, location scopes, and file types, providing a more realistic testbed for evaluation. Using this benchmark, we assess the performance of state-of-the-art localization methods and five LLM-based prompting strategies. Our results reveal significant limitations in current techniques: even at the file level, performance metrics (Acc@5, F1) remain below 40%. This underscores the challenge of generalizing to realistic, multi-faceted issue resolution. To enable future research on project localization for issue resolution, we publicly release MULocBench at https://huggingface.co/datasets/somethingone/MULocBench.

Iterative repair loops have become a core design pattern in LLM-based software engineering systems. These workflows repeatedly generate, validate, and repair artifacts using feedback such as compiler errors or test failures. Despite their widespread use, the impact of repair-loop iteration limits remains poorly understood, as most prior work adopts fixed, often arbitrary, repair budgets. We study repair-loop effectiveness across multiple software engineering tasks, including code generation, test generation, and code translation. Across several representative workflows, datasets, and contemporary low-cost LLMs, we observe a consistent pattern of diminishing returns: the first three to four repair iterations account for most achievable gains, while later iterations contribute only marginal improvements. We further find that repair behavior is influenced more strongly by workflow orchestration and feedback design than by the underlying model itself. These results suggest that repair budgets should be treated as an explicit experimental variable, as they directly affect evaluation outcomes, computational cost, runtime, and reproducibility in LLM-based software engineering research.

Coding agents can fix a failing example without preserving the domain rule that made it fail, so later generations can repeat the same plausible mistake. We present agentic synthesis against counterexample-supplemented sketches, a repository-native method for systems whose governing policy is discovered during implementation. A human starts with a partial, code-shaped sketch, and a coding agent generates the first implementation. When a concrete failure exposes missing or mistaken policy, an operator explicitly approves the corrected behavior and rule. The agent then revises the sketch and repairs or regenerates code and prompt surfaces for that one counterexample. The full archive preserves provenance; a selected regression set gates each revision before the next candidate is revealed; and periodic clean regeneration tests whether the evolved sketch, rather than prompt history or accumulated examples, carries the learned policy. We demonstrate the method with CatSynth, a synthetic browser application and captured coding-agent experiment. In one open-world run with GPT-5.4-mini, 8 of 14 frozen candidate cases became counterexamples. The rebuild controls inherited that promotion schedule, and all three paths passed the 8 accepted cases. Rebuilding from the evolved sketch passed 19 of 21 withheld cases, compared with 15 of 21 when rebuilding from the initial sketch and replaying all accepted examples. Retaining code across counterexamples required 9 Developer calls and 719 lines of cumulative artifact churn, versus 15 calls and 2,394 lines for replay-all, and passed 18 of 21 withheld cases. These results provide inspectable evidence that the evolved sketch carried reviewed policy and that retaining code reduced rework in this run; with one model and one reveal order, they do not establish general superiority or correctness beyond the encoded checks.

Large vision-language models have shown strong progress in UI-to-code generation, yet their test-time self-evolution remains unstable. We first identify a fundamental obstacle, termed visual repair coupling: a local code edit may propagate through layout, style, and component dependencies, correcting one visual mismatch while degrading regions that were previously faithful. To address this issue, we present RubSE, a Rubric-guided Self-Evolution framework that uses rubrics to represent visual feedback as a structured visual-repair context. At each refinement round, RubSE generates typed candidate rubrics, selects one prioritized repair target, and stores previously selected rubrics as history, thereby steering each revision toward a well-scoped visual repair while discouraging repeated or over-broad changes. Evaluations across six VLMs and three UI-to-code benchmarks demonstrate that RubSE substantially outperforms naïve self-evolution in final-round and best-round settings, achieving more stable refinement trajectories and a higher trajectory-level performance ceiling. Further analysis shows that RubSE mitigates trajectory collapse by improving recovery from severe visual regressions, and that stronger rubric generators can transfer effective visual-repair guidance to weaker code improvers.

Graphic layout generation, a growing research field, plays a significant role in user engagement and information perception. Existing methods primarily treat layout generation as a numerical optimization task, focusing on quantitative aspects while overlooking the semantic information of layout, such as the relationship between each layout element. In this paper, we propose LayoutNUWA, the first model that treats layout generation as a code generation task to enhance semantic information and harness the hidden layout expertise of large language models~(LLMs). More concretely, we develop a Code Instruct Tuning (CIT) approach comprising three interconnected modules: 1) the Code Initialization (CI) module quantifies the numerical conditions and initializes them as HTML code with strategically placed masks; 2) the Code Completion (CC) module employs the formatting knowledge of LLMs to fill in the masked portions within the HTML code; 3) the Code Rendering (CR) module transforms the completed code into the final layout output, ensuring a highly interpretable and transparent layout generation procedure that directly maps code to a visualized layout. We attain significant state-of-the-art performance (even over 50\% improvements) on multiple datasets, showcasing the strong capabilities of LayoutNUWA. Our code is available at https://github.com/ProjectNUWA/LayoutNUWA.

Existing evaluations often reduce agent failures to system-level outcomes, obscuring where the fault originated and which intervention would improve the agent system. This creates a repair-assignment problem: the same visible failure may call for model post-training, harness engineering, environment redesign, or benchmark repair depending on its source. Because agent behavior emerges from interactions among models, harnesses, users, tools, memory, and environments, outcome-level labels are often insufficient for improvement. Most failure taxonomies do little to resolve this problem because they are benchmark-specific and lack a shared structure. We introduce an interaction-centric taxonomy that localizes failures to the interactions in which they originate and identifies the responsible component. It organizes 41 failure modes by assigning each to an edge between two components and a fault side indicating where the repair belongs. This makes the taxonomy actionable: model-side failures identify targets for post-training, harness-side failures point to scaffolding and tool-integration fixes, and environment or grader failures reveal evaluation conditions requiring redesign. The schema applies across agent architectures, from coding assistants to long-horizon personal assistants and multi-agent systems. We ground the taxonomy in worked examples from public benchmarks, model system cards, published reports, and logged agent trajectories, and evaluate its reproducibility using independent reasoning agents as judges. Across four frontier models, the strongest judge reaches Cohen's κ=0.76 against human category labels, suggesting that the categories capture shared structure rather than annotator-specific preferences.

Large Language Models (LLMs) often generate code with subtle but critical bugs, especially for complex tasks. Existing automated repair methods typically rely on superficial pass/fail signals, offering limited visibility into program behavior and hindering precise error localization. In addition, without a way to learn from prior failures, repair processes often fall into repetitive and inefficient cycles. To overcome these challenges, we present TraceCoder, a collaborative multi-agent framework that emulates the observe-analyze-repair process of human experts. The framework first instruments the code with diagnostic probes to capture fine-grained runtime traces, enabling deep insight into its internal execution. It then conducts causal analysis on these traces to accurately identify the root cause of the failure. This process is further enhanced by a novel Historical Lesson Learning Mechanism (HLLM), which distills insights from prior failed repair attempts to inform subsequent correction strategies and prevent recurrence of similar mistakes. To ensure stable convergence, a Rollback Mechanism enforces that each repair iteration constitutes a strict improvement toward the correct solution. Comprehensive experiments across multiple benchmarks show that TraceCoder achieves up to a 34.43\% relative improvement in Pass@1 accuracy over existing advanced baselines. Ablation studies verify the significance of each system component, with the iterative repair process alone contributing a 65.61\% relative gain in accuracy. Furthermore, TraceCoder significantly outperforms leading iterative methods in terms of both accuracy and cost-efficiency.

Parallel coding agents can independently produce locally valid changes while still interfering at integration time, expanding beyond planned scope, or relying on premises invalidated by concurrent work. Existing responses emphasize communication, isolated workspaces, late merge-time repair, continuous supervision, or post-hoc runtime recovery. This paper presents Claim Plane, a model-agnostic coordination architecture that treats concurrent software change as a pre-write admission problem. Before implementation, each worker declares a versioned ChangeIntent containing an exact base commit, typed resources, dependencies, and operations marked as committed or contingent. A deterministic control plane atomically admits compatible intents, constrains same-file parallelism to declared regions, serializes unresolved overlap, tracks dependency invalidation, and fails closed on ambiguous authority. During execution, a contingent mutation does not reserve write ownership initially; the first attempted mutation triggers atomic scope promotion and re-admission against the current active set. Brokered execution binds capabilities to intent versions, leases, OS-level worktree locks, monotonic fencing tokens, and Git-tree provenance, while integration verifies immutable patches and evidence. A preliminary six-pair CooperBench mechanism check is reported only as feasibility evidence: static Claim Plane achieved 6/6 pair passes with full serialization, while dynamic scope retained parallel admission on half of the pairs, performed seven successful scope promotions, and failed closed on two undeclared mutations. The sample is intentionally too small for comparative claims. We argue that separating probabilistic planning from deterministic authority provides a foundation for a future learned semantic-dependency model and frontier-model escalation only on unresolved cases.

Recently, multiple Automated Program Repair (APR) techniques based on Large Language Models (LLMs) have been proposed to enhance the repair performance. While these techniques mainly focus on the single-line or hunk-level repair, they face significant challenges in real-world application due to the limited repair task scope and costly statement-level fault localization. However, the more practical function-level APR, which broadens the scope of APR task to fix entire buggy functions and requires only cost-efficient function-level fault localization, remains underexplored. In this paper, we conduct the first comprehensive study of LLM-based function-level APR including investigating the effect of the few-shot learning mechanism and the auxiliary repair-relevant information. Specifically, we adopt six widely-studied LLMs and construct a benchmark in both the Defects4J 1.2 and 2.0 datasets. Our study demonstrates that LLMs with zero-shot learning are already powerful function-level APR techniques, while applying the few-shot learning mechanism leads to disparate repair performance. Moreover, we find that directly applying the auxiliary repair-relevant information to LLMs significantly increases function-level repair performance. Inspired by our findings, we propose an LLM-based function-level APR technique, namely SRepair, which adopts a dual-LLM framework to leverage the power of the auxiliary repair-relevant information for advancing the repair performance. The evaluation results demonstrate that SRepair can correctly fix 300 single-function bugs in the Defects4J dataset, largely surpassing all previous APR techniques by at least 85%, without the need for the costly statement-level fault location information. Furthermore, SRepair successfully fixes 32 multi-function bugs in the Defects4J dataset, which is the first time achieved by any APR technique ever to our best knowledge.

Preference learning enhances Code LLMs beyond supervised fine-tuning by leveraging relative quality comparisons. Existing methods construct preference pairs from candidates based on test case success, treating the higher pass rate sample as positive and the lower as negative. However, this approach does not pinpoint specific errors in the code, which prevents the model from learning more informative error correction patterns, as aligning failing code as a whole lacks the granularity needed to capture meaningful error-resolution relationships. To address these issues, we propose IterPref, a new preference alignment framework that mimics human iterative debugging to refine Code LLMs. IterPref explicitly locates error regions and aligns the corresponding tokens via a tailored DPO algorithm. To generate informative pairs, we introduce the CodeFlow dataset, where samples are iteratively refined until passing tests, with modifications capturing error corrections. Extensive experiments show that a diverse suite of Code LLMs equipped with IterPref achieves significant performance gains in code generation and improves on challenging tasks like BigCodeBench. In-depth analysis reveals that IterPref yields fewer errors. Our code and data will be made publicaly available.

Static analysis is a cornerstone for software vulnerability detection, yet it often struggles with the classic precision-scalability trade-off. In practice, such tools often produce high false positive rates, particularly in large codebases like the Linux kernel. This imprecision can arise from simplified vulnerability modeling and over-approximation of path and data constraints. While large language models (LLMs) show promise in code understanding, their naive application to program analysis yields unreliable results due to inherent reasoning limitations. We introduce BugLens, a post-refinement framework that significantly improves static analysis precision. BugLens guides an LLM to follow traditional analysis steps by assessing buggy code patterns for security impact and validating the constraints associated with static warnings. Evaluated on real-world Linux kernel bugs, BugLens raises precision from 0.10 (raw) and 0.50 (semi-automated refinement) to 0.72, substantially reducing false positives and revealing four previously unreported vulnerabilities. Our results suggest that a structured LLM-based workflow can meaningfully enhance the effectiveness of static analysis tools.

Sequence-to-sequence models have been used to transform erroneous programs into correct ones when trained with a large enough dataset. Some recent studies also demonstrated strong empirical evidence that code review could improve the program repair further. Large language models, trained with Natural Language (NL) and Programming Language (PL), can contain inherent knowledge of both. In this study, we investigate if this inherent knowledge of PL and NL can be utilized to improve automated program repair. We applied PLBART and CodeT5, two state-of-the-art language models that are pre-trained with both PL and NL, on two such natural language-based program repair datasets and found that the pre-trained language models fine-tuned with datasets containing both code review and subsequent code changes notably outperformed each of the previous models. With the advent of code generative models like Codex and GPT-3.5-Turbo, we also performed zero-shot and few-shots learning-based prompt engineering to assess their performance on these datasets. However, the practical application of using LLMs in the context of automated program repair is still a long way off based on our manual analysis of the generated repaired codes by the learning models.

With the rapid development of large language models (LLMs), distributed training and inference frameworks like DeepSpeed have become essential for scaling model training and inference across multiple GPUs or nodes. However, the increasing complexity of these frameworks brings non-trivial software bugs, which may degrade training performance, cause unexpected failures, and result in significant resource waste. Understanding framework bugs' characteristics is fundamental for quality assurance, allowing the design of more effective debugging and repair methods. Thus, our paper conducts the first large-scale empirical analysis of 308 fixed bugs across three popular distributed training/inference frameworks: DeepSpeed, Megatron-LM, and Colossal-AI. We examine bug symptoms, root causes, bug identification and fixing efforts, and common low-effort fixing strategies. Additionally, the distributed nature of these frameworks introduces unique bug root causes, such as allocation strategy error and distributed communication error. Diagnosing and fixing complex bugs remains challenging due to factors like the disconnect between symptoms and root causes, high bug reproduction costs, and low-level or cross-component interactions. Interestingly, we observe that 48% of bug fixes require minimal code changes (<=10 LOC) and follow simple strategies such as conditional logic optimization, parameter handling enhancement, or version compatibility handling, indicating potential for automation. Based on these insights, we offer several implications for improving the reliability of both distributed training and inference frameworks and their dependent LLM projects, while also identifying opportunities to leverage LLM-based tools for automated debugging and repair.

Coding agents often finish a session by returning one squashed patch that mixes feature implementation, bug fixes, refactorings, tests, and configuration edits. While the final code may be correct, collapsing unrelated edits into one patch removes the history structure needed for review, selective revert, and later maintenance. We study retrospective commit-history reconstruction: given a completed squashed change, an agent groups its hunks into commits and materializes a replayable commit sequence. We formalize the task as hunk-to-commit partitioning with a replay requirement and build AtomicCommitBench, containing 800 real consecutive-commit episodes from 10 Python projects. Because multiple decompositions may be reasonable, we evaluate outputs using complementary metrics: PPAR for replay validity, ARI for reference-based grouping quality, and TCR for failure containment on scoreable modified-test episodes. Natural retrospective reconstruction proves substantially harder than replay checking or synthetic tangling. Although nearly all non-random methods achieve replay validity (PPAR >= 0.988), grouping quality ranges from 0.03 to 0.46 ARI. Matched synthetic composites are much easier than real same-author squashed diffs (+0.333 ARI). In our evaluation, the GPT-5.4 setup driven by Codex CLI (0.46 ARI) and the GLM-5 setup driven by Claude Code (0.43 ARI) outperform MiniMax (0.31) and Kimi (0.29). Qualitative analysis identifies same-file lumping and support-hunk drift as recurring failure modes. Dependency-Aware Commit Evidence (DACE) improves the lower-scoring setups by 0.05 to 0.08 ARI, indicating that dependency cues and hunk-role information help agents avoid locality-driven grouping errors. AtomicCommitBench enables evaluation of the commit histories produced by coding agents alongside the final code.

Recent advances in Large Language Models (LLMs) have enabled researchers to focus on practical repository-level tasks in software engineering domain. In this work, we consider a cornerstone task for automating work with software repositories-environment setup, i.e., a task of configuring a repository-specific development environment on a system. Existing studies on environment setup introduce innovative agentic strategies, but their evaluation is often based on small datasets that may not capture the full range of configuration challenges encountered in practice. To address this gap, we introduce a comprehensive environment setup benchmark EnvBench. It encompasses 329 Python and 665 JVM-based (Java, Kotlin) repositories, with a focus on repositories that present genuine configuration challenges, excluding projects that can be fully configured by simple deterministic scripts. To enable further benchmark extension and usage for model tuning, we implement two automatic metrics: a static analysis check for missing imports in Python and a compilation check for JVM languages. We demonstrate the applicability of our benchmark by evaluating three environment setup approaches, including a simple zero-shot baseline and two agentic workflows, that we test with two powerful LLM backbones, GPT-4o and GPT-4o-mini. The best approach manages to successfully configure 6.69% repositories for Python and 29.47% repositories for JVM, suggesting that EnvBench remains challenging for current approaches. Our benchmark suite is publicly available at https://github.com/JetBrains-Research/EnvBench. The dataset and experiment trajectories are available at https://jb.gg/envbench.

Software updates, including bug repair and feature additions, are frequent in modern applications but they often leave test suites outdated, resulting in undetected bugs and increased chances of system failures. A recent study by Meta revealed that 14%-22% of software failures stem from outdated tests that fail to reflect changes in the codebase. This highlights the need to keep tests in sync with code changes to ensure software reliability. In this paper, we present UTFix, a novel approach for repairing unit tests when their corresponding focal methods undergo changes. UTFix addresses two critical issues: assertion failure and reduced code coverage caused by changes in the focal method. Our approach leverages language models to repair unit tests by providing contextual information such as static code slices, dynamic code slices, and failure messages. We evaluate UTFix on our generated synthetic benchmarks (Tool-Bench), and real-world benchmarks. Tool- Bench includes diverse changes from popular open-source Python GitHub projects, where UTFix successfully repaired 89.2% of assertion failures and achieved 100% code coverage for 96 tests out of 369 tests. On the real-world benchmarks, UTFix repairs 60% of assertion failures while achieving 100% code coverage for 19 out of 30 unit tests. To the best of our knowledge, this is the first comprehensive study focused on unit test in evolving Python projects. Our contributions include the development of UTFix, the creation of Tool-Bench and real-world benchmarks, and the demonstration of the effectiveness of LLM-based methods in addressing unit test failures due to software evolution.

Finetuning large language models (LLMs) on instructions leads to vast performance improvements on natural language tasks. We apply instruction tuning using code, leveraging the natural structure of Git commits, which pair code changes with human instructions. We compile CommitPack: 4 terabytes of Git commits across 350 programming languages. We benchmark CommitPack against other natural and synthetic code instructions (xP3x, Self-Instruct, OASST) on the 16B parameter StarCoder model, and achieve state-of-the-art performance among models not trained on OpenAI outputs, on the HumanEval Python benchmark (46.2% pass@1). We further introduce HumanEvalPack, expanding the HumanEval benchmark to a total of 3 coding tasks (Code Repair, Code Explanation, Code Synthesis) across 6 languages (Python, JavaScript, Java, Go, C++, Rust). Our models, OctoCoder and OctoGeeX, achieve the best performance across HumanEvalPack among all permissive models, demonstrating CommitPack's benefits in generalizing to a wider set of languages and natural coding tasks. Code, models and data are freely available at https://github.com/bigcode-project/octopack.

The effectiveness of AI debugging follows a predictable exponential decay pattern; most models lose 60-80% of their debugging capability within just 2-3 attempts, despite iterative debugging being a critical capability for practical code generation systems. We introduce the Debugging Decay Index (DDI), a mathematical framework that quantifies when debugging becomes ineffective and predicts intervention points. Our strategic fresh start approach shifts from exploitation to exploration at strategic points in the debugging process, demonstrating that well-timed interventions can rescue the effectiveness of debugging. DDI reveals a fundamental limitation in current AI debugging and provides the first quantitative framework for optimising iterative code generation strategies.

Training a model for grammatical error correction (GEC) requires a set of labeled ungrammatical / grammatical sentence pairs, but manually annotating such pairs can be expensive. Recently, the Break-It-Fix-It (BIFI) framework has demonstrated strong results on learning to repair a broken program without any labeled examples, but this relies on a perfect critic (e.g., a compiler) that returns whether an example is valid or not, which does not exist for the GEC task. In this work, we show how to leverage a pretrained language model (LM) in defining an LM-Critic, which judges a sentence to be grammatical if the LM assigns it a higher probability than its local perturbations. We apply this LM-Critic and BIFI along with a large set of unlabeled sentences to bootstrap realistic ungrammatical / grammatical pairs for training a corrector. We evaluate our approach on GEC datasets across multiple domains (CoNLL-2014, BEA-2019, GMEG-wiki and GMEG-yahoo) and show that it outperforms existing methods in both the unsupervised setting (+7.7 F0.5) and the supervised setting (+0.5 F0.5).

APR (Automated Program Repair) aims to automatically locate program defects, generate patches and validate the repairs. Existing techniques for APR are often combined with LLMs (Large Language Models), which leverages the code-related knowledge of LLMs to improve repair effectiveness. Current LLM-based APR methods typically utilize test cases only during the inference stage, adopting an iterative approach that performs repair first and validates it through test execution afterward. This conventional paradigm neglects two important aspects: the potential contribution of test cases in the training phase, and the possibility of leveraging testing prior to repair. To address this, we propose Repair-R1, which introduces test cases into the model's training phase and shifts test generation to precede repair. The model is required to first generate discriminative test cases that can distinguish defective behaviors, and then perform repair based on these tests. This enables the model to better locate defects and understand the underlying causes of defects, thereby improving repair effectiveness. We implement Repair-R1 with three different backbone models, using RL (reinforcement learning) to co-optimize test generation and bug repair. Experimental results on four widely adopted benchmarks demonstrate the superiority of Repair-R1. Specially, compared to vanilla models, Repair-R1 improves repair success rate by 2.68\% to 48.29\%, test generation success rate by 16.38\% to 53.28\%, and test coverage by 0.78\% to 53.96\%. We publish the code and weights at https://github.com/Tomsawyerhu/APR-RL and https://huggingface.co/tomhu/Qwen3-4B-RL-5000-step.

Trusted Execution Environments (TEEs) provide hardware-based isolation to protect sensitive data and computations from potentially compromised operating systems (OS). However, TEE applications inevitably interact with the untrusted OS through SDK interfaces, and improper partitioning can introduce severe vulnerabilities such as data leakage and code injection. While prior work has proposed static analysis tools to detect such issues, automated repair remains largely unexplored. This problem is particularly challenging due to three TEE-specific factors: the lack of standardized secure development guidelines, the difficulty of extracting semantic information from low-level C code, and the absence of mature testing and validation methods. In this work, we present TEERepair, a framework for automatically repairing bad partitioning issues in TEE applications. Our approach tackles the above challenges by introducing a domain-specific language (DSL) to encode repair rules that express and capture common TEE security patterns, which are instantiated as patch templates with placeholders for context-specific variables. We then leverage large language models (LLMs) to reason about code semantics and synthesize context-aware patches, and further generate test clients to validate the repairs. We evaluate TEERepair on the TEE Partitioning Errors Benchmark (PartitioningE-Bench), achieving a significantly higher repair success rate of 87.6% compared to baselines. Furthermore, applying TEERepair to real-world TEE projects, we submitted 5 repair pull requests, 2 of which have been confirmed and merged by project maintainers.

Agents built around large language models continually accumulate interaction trajectories during deployment, yet their behavior typically remains fixed. Beyond updating model weights, these trajectories can improve the agent harness that constructs context, mediates tools, validates actions, and recovers execution. We introduce Harness-R1, the first method, to our knowledge, that makes failure-conditioned, lifecycle-wide editing of an existing executable runtime a learned capability. It post-trains a dedicated harness engineer with online reinforcement learning so that its edits are optimized for the realized task success they produce, rather than proposed by a fixed editor. A separate 9B engineer converts batches of target-agent failures into validated executable patches; fresh same-batch reruns of the frozen target provide outcome rewards, so training updates only the engineer. Cold-start supervised fine-tuning initializes this editing policy, which is then trained online with group-relative policy optimization. Across WebShop, ALFWorld, and DBBench, Harness-R1 raises vanilla Qwen3.5-9B success from 44.3% to 53.6% (+9.3 percentage points). After direct target-agent fine-tuning, a target-specific engineer raises the average further from 59.2% to 64.2% (+5.0 points); because these gains hold both before and after fine-tuning the target, Harness-R1 points toward co-evolving the harness engineer and the target agent.

Language models of code (LMs) work well when the surrounding code in the vicinity of generation provides sufficient context. This is not true when it becomes necessary to use types or functionality defined in another module or library, especially those not seen during training. LMs suffer from limited awareness of such global context and end up hallucinating, e.g., using types defined in other files incorrectly. Recent work tries to overcome this issue by retrieving global information to augment the local context. However, this bloats the prompt or requires architecture modifications and additional training. Integrated development environments (IDEs) assist developers by bringing the global context at their fingertips using static analysis. We extend this assistance, enjoyed by developers, to the LMs. We propose a notion of monitors that use static analysis in the background to guide the decoding. Unlike a priori retrieval, static analysis is invoked iteratively during the entire decoding process, providing the most relevant suggestions on demand. We demonstrate the usefulness of our proposal by monitoring for type-consistent use of identifiers whenever an LM generates code for object dereference. To evaluate our approach, we curate PragmaticCode, a dataset of open-source projects with their development environments. On models of varying parameter scale, we show that monitor-guided decoding consistently improves the ability of an LM to not only generate identifiers that match the ground truth but also improves compilation rates and agreement with ground truth. We find that LMs with fewer parameters, when guided with our monitor, can outperform larger LMs. With monitor-guided decoding, SantaCoder-1.1B achieves better compilation rate and next-identifier match than the much larger text-davinci-003 model. The datasets and code will be released at https://aka.ms/monitors4codegen .

Repository-level bug localization-the task of identifying where code must be modified to fix a bug-is a critical software engineering challenge. Standard Large Language Modles (LLMs) are often unsuitable for this task due to context window limitations that prevent them from processing entire code repositories. As a result, various retrieval methods are commonly used, including keyword matching, text similarity, and simple graph-based heuristics such as Breadth-First Search. Graph Neural Networks (GNNs) offer a promising alternative due to their ability to model complex, repository-wide dependencies; however, their application has been hindered by the lack of a dedicated benchmark. To address this gap, we introduce GREPO, the first GNN benchmark for repository-scale bug localization tasks. GREPO comprises 86 Python repositories and 47294 bug-fixing tasks, providing graph-based data structures ready for direct GNN processing. Our evaluation of various GNN architectures shows outstanding performance compared to established information retrieval baselines. This work highlights the potential of GNNs for bug localization and established GREPO as a foundation resource for future research, The code is available at https://github.com/qingpingmo/GREPO.

Code completion has become an essential tool for daily software development. Existing evaluation benchmarks often employ static methods that do not fully capture the dynamic nature of real-world coding environments and face significant challenges, including limited context length, reliance on superficial evaluation metrics, and potential overfitting to training datasets. In this work, we introduce a novel framework for enhancing code completion in software development through the creation of a repository-level benchmark ExecRepoBench and the instruction corpora Repo-Instruct, aim at improving the functionality of open-source large language models (LLMs) in real-world coding scenarios that involve complex interdependencies across multiple files. ExecRepoBench includes 1.2K samples from active Python repositories. Plus, we present a multi-level grammar-based completion methodology conditioned on the abstract syntax tree to mask code fragments at various logical units (e.g. statements, expressions, and functions). Then, we fine-tune the open-source LLM with 7B parameters on Repo-Instruct to produce a strong code completion baseline model Qwen2.5-Coder-Instruct-C based on the open-source model. Qwen2.5-Coder-Instruct-C is rigorously evaluated against existing benchmarks, including MultiPL-E and ExecRepoBench, which consistently outperforms prior baselines across all programming languages. The deployment of can be used as a high-performance, local service for programming development\url{https://execrepobench.github.io/}.

Large language models (LLMs) are increasingly used to edit existing code, but correctness alone is not enough: useful repairs should also be minimal, reviewable, and faithful to the original implementation. We study over-editing, the tendency of a model to rewrite code beyond what is required to fix a bug. We construct an evaluation framework from 400 BigCodeBench problems by injecting controlled AST-level corruptions into reference solutions, giving each repair task a known minimal patch. Across frontier LLMs, over-editing is widespread even among strong models like GPT-5.5: high Pass@1 can coexist with unnecessarily large edits and added cognitive complexity. A preservation instruction substantially reduces this behavior, lowering average excess Levenshtein distance from 0.195 to 0.131, reducing added cognitive complexity by 26.6%, and increasing Pass@1 by 2.3 points. However, these gains do not simply follow from a larger reasoning budget or larger models. We next ask whether minimal editing can be learned directly during post-training. We observe that supervised fine-tuning overfits to seen corruption patterns, whereas reinforcement learning gives the best out-of-domain edit-fidelity and performance-retention trade-off. These results position edit fidelity as a distinct axis of code-repair quality and show that it can be measured and learned.

Large Language Models (LLMs) are increasingly applied to software engineering tasks, especially code repair. However, developers often struggle to interpret model outputs, limiting effective human-AI teaming. Prior work largely optimizes repaired code while under-addressing the natural-language feedback that enables comprehension and iterative improvement. We present DPO-f+, a novel framework that aligns code-repair feedback with developer needs and profiles. It (1) formalizes developer-profiled, domain-specific metrics for feedback alignment; (2) automatically constructs pairwise preference datasets from code-repair tasks; (3) fine-tunes using Direct Preference Optimization (DPO) augmented with a lightweight margin signal; and (4) provides an automated feedback evaluation protocol. Empirically, DPO-f+ outperforms both the baseline and standard DPO on generated-code accuracy and overall feedback alignment. On novice programming tasks, DPO-f+ raises the top-1 pass rate by 5.71 percentage points (pp) over the baseline and by 3.30 pp over DPO. On the more challenging SWE-bench Lite benchmark, it increases the issue-resolution rate by 1.67 pp over DPO and by 4.67 pp over the baseline. It also achieves the largest improvement in feedback alignment, outperforming DPO and the baseline. By aligning feedback more closely with developer needs, DPO-f+ turns LLM-assisted repair from one-shot outputs into a collaborative sensemaking workflow, providing a practical approach to enhancing code comprehension and fostering more effective human-AI teaming in software engineering.

High quality bugs are key to training the next generation of language model based software engineering (SWE) agents. We introduce a novel method for synthetic generation of difficult and diverse bugs. Our method instructs SWE Agents to introduce a feature into the codebase whereby they may unintentionally break tests, resulting in bugs. Prior approaches often induce an out-of-distribution effect by generating bugs intentionally (e.g. by introducing local perturbation to existing code), which does not reflect realistic development processes. We perform qualitative analysis to demonstrate that our approach for generating bugs more closely reflects the patterns found in human-authored edits. Through extensive experiments, we demonstrate that our bugs provide more efficient training data for supervised fine-tuning, outperforming other bug datasets by 2% with half the training data (1.2k vs. 3k bugs). We train on our newly generated bugs in addition to existing bug datasets to get FrogBoss a state-of-the-art 32B parameter model on SWE-bench Verified with a pass@1 of 54.6% and FrogMini a state-of-the-art 14B model on SWE-bench Verified with a pass@1 of 45.3% on SWE-bench Verified averaged over three seeds.

Self-correction is particularly useful when a failure constrains the next repair. Coding agents benefit from this property because compilers, tests, and execution traces turn many failures into typed recovery signals, but broad language-agent tasks often expose only a coarse task failure. This creates a tension for generic recovery playbooks: they broaden the agent's context precisely when the system needs a narrower repair interface, mixing incompatible signals for invalid actions, missing procedures, and strict-format errors. Our insight is that development-set failures can recover part of the missing diagnostic substrate by deciding which recovery interventions are admissible before test-time correction. We propose DARC, a diagnosis-guided recovery harness that profiles task-family failure modes, prunes mismatched interventions from a shared recovery library, and freezes a verifier-selected success-cost policy for deployment. This causal order makes correction selective: the harness first determines what kind of failure can be repaired, then decides how much recovery evidence to spend. In ALFWorld, AppWorld, and XBRL Finance, the same protocol yields an action-validity harness, a procedural-recovery fallback, and a format-precision retrieval policy; in each evaluated setting it improves average task performance over base agents and broad playbooks while reducing environment steps or retrieval budget. Our experiments show that failures need not trigger uniformly more context: DARC turns self-correction from prompt expansion into recovery-interface design. DARC provides a practical route toward more reliable agents in domains where compiler-like feedback is absent: making failures actionable before making contexts larger.